A set of diamond films was grown by microwave plasma enhanced chemical vapour deposition using a CO2-CH4 gas mixture. Film morphology, preferential orientation and crystal quality were systematically changed by varying the CW, concentration and substrate temperature in the ranges 47-52% and 750-850 degrees C, respectively. The resulting films were characterised by scanning electron microscopy, X-ray diffraction, Raman spectroscopy and cathodoluminescence (CL). The crystalline quality of the films, as assessed by Raman spectroscopy, increases at lower substrate temperatures (T-s = 750 degrees C) and when moving from (110) towards (100) texturing. Independently of the substrate temperature, a strong decrease of the band-A cathodoluminescence at 435 nm is found as the him preferential orientation goes from (110) to (100). A clear correlation between the width of the diamond Raman line and the band-A emission is observed, giving insight into the nature of this band. In particular, this result is consistent with the attribution of band-A CL to the presence of dislocations. (C) 1999 Published by Elsevier Science S.A. All rights reserved.