Surface modification of aramid fiber by air DBD plasma at atmospheric pressure with continuous on-line processing

被引：148

作者：

Xi, Min ^{[1
]}

Li, Yu-Liang ^{[1
]}

Shang, Shu-yong ^{[1
]}

Li, Dai-Hong ^{[1
]}

Yin, Yong-Xiang ^{[1
]}

Dai, Xiao-Yan ^{[1
]}

机构：

[1] Sichuan Univ, Sch Chem Engn, Chengdu 610065, Peoples R China

来源：

SURFACE & COATINGS TECHNOLOGY | 2008年 / 202卷 / 24期

关键词：

Aramid fiber; Surface modification; DBD plasma; Continuous on-line processing; Power density; Treatment time;

D O I：

10.1016/j.surfcoat.2008.06.181

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Aramid fiber (AF) samples are modified by air dielectric barrier discharge (DBD) plasma at atmospheric pressure. Plasma discharge power density and sample treatment time are investigated as the major parameters. Modified AF is characterized by SEM, XPS and wettability tests. It is shown that the surface roughness is improved, the O/C atomic ratio is increased from 15.99% to 27.15%, and the surface wettability is also enhanced significantly. It is also found that the improvements of physical and chemical properties increased with increasing power density and treatment time. The experiment is operated in the case of continuous on-line processing with properly high speed of AF transmission. It is close to industrial production and application. (c) 2008 Elsevier B.V. All rights reserved.

引用

页码：6029 / 6033

页数：5

共 36 条

[11] Correlation of surface hydrophilicity and surface static properties in epoxy/glass fibre after plasma treatment [J].

Lim, KB ;

Lee, BS ;

Kim, JT ;

Lee, DC .

SURFACE AND INTERFACE ANALYSIS, 2002, 33 (12) :918-923

[12] Effect of surface modification by bromination and metalation on Kevlar fibre-epoxy adhesion [J].

Lin, JS .

EUROPEAN POLYMER JOURNAL, 2002, 38 (01) :79-86

[13] The Effect of chemical treatment on reinforcement/matrix interaction in Kevlar-fiber/bismaleimide composites [J].

Lin, TK ;

Wu, SJ ;

Lai, JG ;

Shyu, SS .

COMPOSITES SCIENCE AND TECHNOLOGY, 2000, 60 (09) :1873-1878

[14] Statistical analysis of the effect of dielectric barrier discharge (DBD) operating parameters on the surface processing of poly(methylmethacrylate) film [J].

Liu, CZ ;

Brown, NMD ;

Meenan, BJ .

SURFACE SCIENCE, 2005, 575 (03) :273-286

[15] Comparative study on the effect of RF and DBD plasma treatment on PTFE surface modification [J].

Liu, CZ ;

Wu, JQ ;

Ren, LQ ;

Tong, J ;

Li, JQ ;

Cui, N ;

Brown, NMD ;

Meenan, BJ .

MATERIALS CHEMISTRY AND PHYSICS, 2004, 85 (2-3) :340-346

[16] Atmospheric Pressure Plasma Jet Treatment of Polyethylene Surfaces for Adhesion Improvement [J].

Lommatzsch, Uwe ;

Pasedag, Dirk ;

Baalmann, Alfred ;

Ellinghorst, Guido ;

Wagner, Hans-Erich .

PLASMA PROCESSES AND POLYMERS, 2007, 4 :S1041-S1045

[17] Study of the ageing behaviour of polymer films treated with a dielectric barrier discharge in air, helium and argon at medium pressure [J].

Morent, R. ;

De Geyter, N. ;

Leys, C. ;

Gengembre, L. ;

Payen, E. .

SURFACE & COATINGS TECHNOLOGY, 2007, 201 (18) :7847-7854

[18]

OGAWA T, 2007, J APPL POLYM SCI, V91, P1162

[19] Cold plasma-induced modification of the dyeing properties of poly(ethylene terephthalate) fibers [J].

Raffaele-Addamo, A ;

Selli, E ;

Barni, R ;

Riccardi, C ;

Orsini, F ;

Poletti, G ;

Meda, L ;

Massafra, MR ;

Marcandalli, B .

APPLIED SURFACE SCIENCE, 2006, 252 (06) :2265-2275

[20] Investigation of the influence of acidic and basic surface groups on carbon fibres on the interfacial shear strength in an epoxy matrix by means of single-fibre pull-out test [J].

Ramanathan, T ;

Bismarck, A ;

Schulz, E ;

Subramanian, K .

COMPOSITES SCIENCE AND TECHNOLOGY, 2001, 61 (04) :599-605

← 1 2 3 4 →