Microstructural evolution of some MgO-TiO2 and MgO-Al2O3 powder mixtures during high-energy ball milling and post-annealing studied by X-ray diffraction

被引:32
作者
Stubicar, N
Tonejc, A
Stubicar, M
机构
[1] Univ Zagreb, Fac Sci, Dept Phys, HR-10002 Zagreb, Croatia
[2] Univ Zagreb, Fac Sci, Dept Chem, HR-10001 Zagreb, Croatia
关键词
preparation of insulators : MgTiO3; Mg2TiO4 and MgAl2O4 single-phase powders; MgO-TiO2 and MgO-Al2O3 powder mixtures; high-energy ball milling; post-anneal processing; X-ray diffraction method; oxide materials; insulators; mechanochemical processing; X-ray diffraction;
D O I
10.1016/j.jallcom.2003.09.026
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
High-energy dry ball-mill and post-anneal processing were applied to synthesize MgTiO3 and Mg2TiO4 single crystalline phases from the predetermined compositions of MgO-TiO2 powder mixtures. Also, the experiments were performed to show that it is possible to prepare MgAl2O4 single crystalline phase from the predetermined composition of MgO-AI(2)O(3) powder mixture only by employing high-energy dry ball milling, i.e. without post-annealing the milled samples. In contrast, fully developed single crystalline powders of MgTiO3 and Mg2TiO4 were obtained after post-annealing the milled samples for 1 h at 900 and 1200degreesC, respectively. (C) 2003 Elsevier B.V All rights reserved.
引用
收藏
页码:296 / 301
页数:6
相关论文
共 30 条
[1]  
AKIMOTO S, 1967, J CHEM PHYS, V47, P184
[2]  
[Anonymous], [Matsushita Elec. Ind. Co., Ltd, Jpn. Pat. Appl], Patent No. [81/71743, 8171743]
[3]   Mechanochemical effects on the precursor formation and microwave dielectric characteristics of MgTiO3 [J].
Baek, JG ;
Isobe, T ;
Senna, M .
SOLID STATE IONICS, 1996, 90 (1-4) :269-279
[4]   FORMATION OF PARTIALLY INVERSE MG-AL SPINEL BY GRINDING MGO WITH GAMMA-AL2O3 [J].
BARON, P ;
LIN, IJ ;
NADIV, S ;
MELAMUD, M .
JOURNAL OF THERMAL ANALYSIS, 1994, 42 (01) :207-217
[5]   MECHANISM OF MECHANICAL ALLOYING [J].
BENJAMIN, JS ;
VOLIN, TE .
METALLURGICAL TRANSACTIONS, 1974, 5 (08) :1929-1934
[6]  
DELAMOYE P, 1969, CR ACAD SCI C CHIM, V269, P304
[7]  
Ermakov A. E., 1981, Fizika Metallov i Metallovedenie, V52, P1184
[8]   Comparative studies of the mechanochemical synthesis of MgTiO3 precursors by milling various mixtures containing oxides and hydroxides [J].
Hamada, K ;
Isobe, T ;
Senna, M .
JOURNAL OF MATERIALS SCIENCE LETTERS, 1996, 15 (07) :603-605
[9]   Effect of grinding on synthesis of MgAl2O4 spinel from a powder mixture of Mg(OH)2 and Al(OH)3 [J].
Kim, W ;
Saito, F .
POWDER TECHNOLOGY, 2000, 113 (1-2) :109-113
[10]   PREPARATION OF AMORPHOUS NI60NB40 BY MECHANICAL ALLOYING [J].
KOCH, CC ;
CAVIN, OB ;
MCKAMEY, CG ;
SCARBROUGH, JO .
APPLIED PHYSICS LETTERS, 1983, 43 (11) :1017-1019