Dioxin abatement strategies and mass balance at a municipal waste management plant

Since the thermal management of municipal solid waste (MSW) is considered to be one of the major sources of polychlorinated dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs), the purpose of this study was to show the results of a dioxin abatement program performed in the municipal waste incineration (MWI) plant of Tarragona (NE Spain). Previously, stack gas emission levels of PCDDs/PCDFs around 3.26 ng I-TEQ/Nm(3) were determined when the gas-cleaning system consisted only of an electrostatic precipitator (ESP). Decreased levels, below 0.1 ng I-TEQ/Nm(3), were observed when a new air pollution control system was installed. This new system was improved by the injection of activated carbon, which helped to lower the levels of PCDDs/PCDFs to around 0.01 ng I-TEG/Nm(3). Considering the absence of a particular impact on herbages soils, and ambient air around the plant, as reported in previous works, and the hypothesis that a modern installation could become a sink for dioxins instead of a source, a dioxin mass balance was evaluated. The study compared in a large-scale MWI plant the levels of PCDDs/PCDFs of all input and output contributors (MSW, ambient air, stack gas emission, fly ash, and slag) forming part of the inventory collected in various monitoring campaigns. The findings revealed a remarkable homogeneity in output values (between 1.19 and 2.62 ng I-TEQ/yr) in contrast to the large variability observed in input values. In the first sampling campaign, the dioxin content in MSW was around 64.15 ng I-TEQ/kg, and a negative balance, of 7.68 g I-TEQ/yr was Calculated. However, in the latest campaign, levels were about 2.36 ng I-TEG/kg MSW, resulting in a positive balance of 2.28 g I-TEG/yr.