Morphology, kinetics, and thermodynamics of solid-state aging of eutectic SnPb and Pb-free solders (Sn-3.5Ag, Sn-3.8Ag-0.7Cu and Sn-0.7Cu) on Cu

Intermetallic compound (IMC) growth during solid-state aging at 125, 150, and 170 degreesC up to 1500 h for four solder alloys (eutectic SnPb, Sn-3.5Ag, Sn-3.8Ag-0.7Cu, and Sn-0.7Cu) on Cu under bump metallization was investigated. The samples were reflowed before aging. During the reflow, the solders were in the molten state and the formation of the IMC Cu6Sn5 in the cases of eutectic SnPb and Sn-3.5Ag had a round scallop-type morphology, but in Sn-0.7Cu and Sn-3.8Ag-0.7Cu the scallops of Cu6Sn5 were faceted. In solid-state aging, all these scallops changed to a layered-type morphology. In addition to the layered Cu6Sn5, the IMC Cu3Sn also grew as a layer and was as thick as the Cu6Sn5. The activation energy of intermetallic growth in solid-state aging is 0.94 eV for eutectic SnPb and about 1.05 eV for the Pb-free solders. The rate of intermetallic growth in solid-state aging is about 4 orders of magnitude slower than that during reflow. Ternary phase diagrams of Sn-Pb-Cu and Sn-Ag-Cu are used to discuss the reactions. These diagrams predict the first phase of IMC formation in the wetting reaction and the other phases formed in solid-state aging. Yet, the morphological change and the large difference in growth rates between the wetting reaction and solid-state aging cannot be predicted.