Microstructure and mechanical properties of pulsed DC magnetron sputtered nanocomposite Cr-Cu-N thin films

The nanocomposite Cr-Cu-N thin films have been deposited at a substrate temperature of 250 degrees C by a bipolar asymmetric pulsed DC reactive magnetron sputtering process. Different Cu contents ranging from 0.4 to 14.9 at.% were achieved. The structures of Cr-Cu-N thin films were analyzed by XRD. The surface and cross sectional morphologies of thin films were examined by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The nanoindentation and scratch tests were adopted to evaluate the mechanical and tribological properties of Cr-Cu-N coatings. The influences of Cu content on the structure, mechanical and tribological properties of Cr-Cu-N coatings were explored. It is observed that the columnar structure no longer exists when the Cu content exceeds 10.9 at.%. The stability of CrN phase in the coating is influenced by the Cu content. The scratching coefficient of thin films decreases with increasing Cu content. Sufficient adhesion and tribological properties of Cr-Cu-N coatings are achieved. The maximum average hardness around 20 GPa and scratching coefficient around 0.1 are found in the coatings with around 2.1 to 2.6 at.% Cu in this work. (c) 2006 Elsevier B.V All rights reserved.