Microstructure evolution in magnesium alloy AZ31 during cyclic extrusion compression

被引：80

作者：

Chen, Y. J. ^{[1
]}

Wang, Q. D. ^{[1
]}

Roven, H. J. ^{[2
]}

Karlsen, M. ^{[2
]}

Yu, Y. D. ^{[2
]}

Liu, M. P. ^{[2
]}

Hjelen, J. ^{[2
]}

机构：

[1] Shanghai Jiao Tong Univ, Light Alloy Net Forming Natl Engn Res Ctr, Shanghai 200030, Peoples R China

[2] Norwegian Univ Sci & Technol, Dept Mat Technol, N-7491 Trondheim, Norway

来源：

JOURNAL OF ALLOYS AND COMPOUNDS | 2008年 / 462卷 / 1-2期

基金：

中国国家自然科学基金;

关键词：

metals; microstructure; grain boundaries; strain; cyclic extrusion compression (CEC);

D O I：

10.1016/j.jallcom.2007.07.116

中图分类号：

O64 [物理化学（理论化学）、化学物理学];

学科分类号：

070304 ; 081704 ;

摘要：

The microstructure evolution of an AZ31 Mg alloy during cyclic extrusion compression (CEC) is investigated by optical microscopy, TEM and electron backscatter diffraction (EBSD). The mean grain size of 1.77 mu m with fine grains of 150 +/- 150 nm for AZ31 alloy is obtained after CEC 7 passes at 573 K. The colonies of fine grains have a representative grain size which decreases and develops a more homogeneous distribution with the increase of CEC accumulated strain. The fraction of low angle grain boundaries (LAGBs) tends to decrease while the average misorientation tends to increase with increasing number of CEC pass. Micro-textures are formed in AZ31 alloys during CEC and tend to be weaker as the CEC pass increases. A compound mechanism of grain refinement for magnesium alloys is introduced to explain the microstructure evolution during CEC processing. (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：192 / 200

页数：9

共 27 条

[1] Microstructural evolution during hot compression and subsequent alpha precipitation of the beta titanium alloy beta-Cez [J].

Chaussy, F ;

Driver, JH .

REVUE DE METALLURGIE-CAHIERS D INFORMATIONS TECHNIQUES, 1996, 93 (09) :1057-1066

[2] Improving the mechanical properties of AZ31 Mg alloy by high ratio extrusion [J].

Chen, YJ ;

Wang, QD ;

Peng, JG ;

Zhai, CQ .

NANOMATERIALS BY SEVERE PLASTIC DEFORMATION, 2006, 503-504 :865-870

[3] Fabrication of bulk UFG magnesium alloys by cyclic extrusion compression [J].

Chen, Yongjun ;

Wang, Qudong ;

Lin, Jinbao ;

Zhang, Lujun ;

Zhai, Chunquan .

JOURNAL OF MATERIALS SCIENCE, 2007, 42 (17) :7601-7603

[4] Study of 6061-Al2O3p composites produced by reciprocating extrusion [J].

Chu, HS ;

Liu, KS ;

Yeh, JW .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 2000, 31 (10) :2587-2596

[5] Texture evolution during large-strain hot rolling of the Mg AZ61 alloy [J].

del Valle, JA ;

Pérez-Prado, MT ;

Ruano, OA .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 355 (1-2) :68-78

[6]

DING HL, 2006, MAT SCI ENG A

[7] Microstructure and properties of copper and aluminum alloy 3003 heavily worked by equal channel angular extrusion [J].

Ferrasse, S ;

Segal, VM ;

Hartwig, KT ;

Goforth, RE .

METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, 1997, 28 (04) :1047-1057

[8] The development of superplastic ductilities and microstructural homogeneity in a magnesium ZK60 alloy processed by ECAP [J].

Figueiredo, Roberto B. ;

Langdon, Terence G. .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2006, 430 (1-2) :151-156

[9] DYNAMIC RECRYSTALLIZATION AND THE DEVELOPMENT OF MICROSTRUCTURE DURING THE HIGH-TEMPERATURE DEFORMATION OF MAGNESIUM [J].

ION, SE ;

HUMPHREYS, FJ ;

WHITE, SH .

ACTA METALLURGICA, 1982, 30 (10) :1909-1919

[10] Influence of {10-12} extension twinning on the flow behavior of AZ31 Mg alloy [J].

Jiang, Lan ;

Jonas, John J. ;

Luo, Alan A. ;

Sachdev, Anil K. ;

Godet, Stephane .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2007, 445 :302-309

← 1 2 3 →