Anticorrosively enhanced PMMA-clay nanocomposite materials with quaternary alkylphosphonium salt as an intercalating agent

被引:227
作者
Yeh, JM [1 ]
Liou, SJ
Lin, CY
Cheng, CY
Chang, YW
机构
[1] Chung Yuan Christian Univ, Dept Chem, Chungli 32023, Taiwan
[2] Chung Yuan Christian Univ, Nanomat Res Ctr, Chungli 32023, Taiwan
[3] Nanya Inst Technol, Dept Chem Engn, Chungli, Taiwan
关键词
D O I
10.1021/cm010337f
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
A series of polymer-clay nanocomposite (PCN) materials that consisted of poly(methyl methacrylate) (PMMA) and layered montmorillonite (MMT) clay were prepared by effectively dispersing the inorganic nanolayers of MMT clay in an organic PMMA matrix via in situ thermal polymerization. Organic methyl methacrylate monomers were first intercalated into the interlayer regions of organophilic clay hosts followed by a typical free radical polymerization. The as-synthesized PCN materials were characterized by infrared spectroscopy, wide-angle powder X-ray diffraction, and transmission electron microscopy. PCN coatings with low clay loading (e.g., 1 wt %) on cold-rolled steel were found much superior in anticorrosion over those of bulk PMMA based on a series of electrochemical measurements of corrosion potential, polarization resistance, corrosion current, and impedance spectroscopy in 5 wt % aqueous NaCl electrolyte. The molecular weights of PMMA extracted from PCN materials and bulk PMMA were determined by gel permeation chromatography with tetrahydrofuran as an eluant. Effects of the material composition on the molecular barrier, optical clarity, and thermal stability of PMMA along with PCN materials, in the form of both free-standing film and fine powder, were also studied by molecular permeability analysis, ultraviolet-visible transmission spectra, differential scanning calorimetry, and thermogravimetric analysis, respectively.
引用
收藏
页码:154 / 161
页数:8
相关论文
共 18 条
[1]  
BRANDRUP J, 1989, POLYM HDB
[2]   Flammability properties of polymer - Layered-silicate nanocomposites. Polypropylene and polystyrene nanocomposites [J].
Gilman, JW ;
Jackson, CL ;
Morgan, AB ;
Harris, R ;
Manias, E ;
Giannelis, EP ;
Wuthenow, M ;
Hilton, D ;
Phillips, SH .
CHEMISTRY OF MATERIALS, 2000, 12 (07) :1866-1873
[3]  
Kim JW, 2000, MACROMOL SYMP, V155, P229, DOI 10.1002/1521-3900(200004)155:1<229::AID-MASY229>3.0.CO
[4]  
2-R
[5]   ON THE NATURE OF POLYIMIDE CLAY HYBRID COMPOSITES [J].
LAN, T ;
KAVIRATNA, PD ;
PINNAVAIA, TJ .
CHEMISTRY OF MATERIALS, 1994, 6 (05) :573-575
[6]  
Lee DC, 1996, J APPL POLYM SCI, V61, P1117, DOI 10.1002/(SICI)1097-4628(19960815)61:7<1117::AID-APP7>3.0.CO
[7]  
2-P
[8]   Corrosion protection of mild steel by electroactive polyaniline coatings [J].
Li, P ;
Tan, TC ;
Lee, JY .
SYNTHETIC METALS, 1997, 88 (03) :237-242
[9]   POLYMERIZATION OF STYRENE WITH INITIATOR IONICALLY BOUND TO HIGH-SURFACE-AREA MICA - GRAFTING VIA AN UNEXPECTED MECHANISM [J].
MEIER, LP ;
SHELDEN, RA ;
CASERI, WR ;
SUTER, UW .
MACROMOLECULES, 1994, 27 (06) :1637-1642
[10]   Structure and properties of poly(vinyl alcohol)/Na+ montmorillonite nanocomposites [J].
Strawhecker, KE ;
Manias, E .
CHEMISTRY OF MATERIALS, 2000, 12 (10) :2943-2949