Optimisation of the chlorthalidone chiral separation by capillary electrochromatography using an achiral stationary phase and cyclodextrin in the mobile phase

The separation of chlorthalidone enantiomers in capillary electrochromatography on an achiral stationary phase when adding a chiral selector, hydroxypropyl-beta-cyclodextrin, to the mobile phase, was optimised. The goal was to investigate the feasibility of modelling retention times and resolution when during the optimisation procedure regular replacement of columns is required due to their fragility. Therefore, it is essential that the packing procedure delivers reproducible columns. The optimisation of an existing chlorthalidone separation was chosen as case study. The influence of two factors, chiral selector concentration and organic modifier content, on the responses was modelled. The experiments performed prior to modelling were defined by a central composite design. Results on different columns, obtained under identical experimental conditions. were found comparable and thus modelling was possible in situations where several columns were required to complete a design. A second-order polynomial model was built for both responses. Optimal separations were also predicted using Derringer's desirability functions. The optimum was found at 33 mM cyclodextrin and 16% (v/v) acetonitrile on two types of columns (with different packing times) leading to a strong reduction in analysis time for an equally good separation compared to the initial conditions. Measured and predicted responses were found comparable, indicating that acceptable models were obtained. (C) 2003 Elsevier B.V. All rights reserved.