Numerical experiments on the influence of material and other variables on plane strain continuous chip formation in metal machining

被引:26
作者
Childs, THC [1 ]
机构
[1] Univ Leeds, Sch Mech Engn, Leeds LS2 9JT, W Yorkshire, England
基金
美国国家航空航天局;
关键词
metal machining mechanics; chip formation; finite element modelling;
D O I
10.1016/j.ijmecsci.2005.09.012
中图分类号
TH [机械、仪表工业];
学科分类号
0802 ;
摘要
Finite element simulations of metal machining chip formation have been carried out with model materials that have been given a range of thermal softening and strain hardening behaviours. For materials that are approximately perfectly plastic, predictions of slip-line field theory regarding the dependence of chip/tool normal contact stress distribution on the combination of shear plane angle, friction angle and tool rake angle are reproduced. But it has not proved possible to generate the full range of non-unique fields predicted by slip-line theory. The introduction of strain hardening causes chips to thicken but with deviations at high hardening rates from the behaviour proposed by Oxley. These observations are generally in agreement with previously published physical test data. A study of the effect of increasing the cutting edge radius confirms the important effect of that, particularly on tool thrust forces. By continually comparing the results to expectations from more simple modelling, and asking the question 'Is that expected?', a general problem of creating a friction law applicable to both plastically flowing high stress conditions and to more lightly loaded elastic conditions has been recognised and is the subject of continuing work. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:307 / 322
页数:16
相关论文
共 19 条
[11]   A universal slip-line model with non-unique solutions for machining with curled chip formation and a restricted contact tool [J].
Fang, N ;
Jawahir, IS ;
Oxley, PLB .
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 2001, 43 (02) :557-580
[12]   THE MECHANICS OF MACHINING - A NEW APPROACH [J].
HILL, R .
JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 1954, 3 (01) :47-53
[13]  
Kudo H., 1965, INT J MECH SCI, V7, P43, DOI [10.1016/0020-7403, DOI 10.1016/0020-7403, 10.1016/0020-7403(65)90084-6, DOI 10.1016/0020-7403(65)90084-6]
[14]  
KUMBERA TG, 2001, INT J MACHINING SCI, V5, P341
[15]  
LEE EH, 1951, J APPL MECH-T ASME, V18, P405
[16]   MODELING AND SIMULATION OF HIGH-SPEED MACHINING [J].
MARUSICH, TD ;
ORTIZ, M .
INTERNATIONAL JOURNAL FOR NUMERICAL METHODS IN ENGINEERING, 1995, 38 (21) :3675-3694
[17]  
Oxley P.L.B., 1989, Mechanics of Machining
[18]   SLIP-LINE SOLUTION FOR ORTHOGONAL CUTTING WITH A CHIP BREAKER AND FLANK WEAR [J].
SHI, T ;
RAMALINGAM, S .
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 1991, 33 (09) :689-704
[19]  
Ueda K., 2000, INT J FORMING PROCES, V3, P37