Microengineering of ceramics by direct ink-Jet printing

被引：134

作者：

Mott, M ^{[1
]}

Song, JH ^{[1
]}

Evans, JRG ^{[1
]}

机构：

[1] Brunel Univ, Dept Mech Engn, Uxbridge UB8 3PH, Middx, England

来源：

JOURNAL OF THE AMERICAN CERAMIC SOCIETY | 1999年 / 82卷 / 07期

关键词：

D O I：

10.1111/j.1151-2916.1999.tb01982.x

中图分类号：

TQ174 [陶瓷工业]; TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

A modified piezoelectric drop-on-demand ink-jet printer was used to build 3-D ceramic structures with cavities and overhangs by direct ceramic deposition. Inks in the form of zirconia and carbon suspensions were prepared with suitable viscosities and surface tensions. The multinozzle printer was used to microengineer small components in which support structures were created from the carbon ink and the carbon was removed after pyrolysis of the organic vehicle but before sintering the zirconia. The viability of this process is discussed in terms of machine limitations and ink drying problems.

引用

页码：1653 / 1658

页数：6

共 8 条

[1] Preparation of piezoelectric thick films using a jet printing system
Adachi, H
Kuroda, Y
Imahashi, T
Yanagisawa, K
[J]. JAPANESE JOURNAL OF APPLIED PHYSICS PART 1-REGULAR PAPERS BRIEF COMMUNICATIONS & REVIEW PAPERS, 1997, 36 (3A): : 1159 - 1163
[2] Atkinson A, 1997, J SOL-GEL SCI TECHN, V8, P1093
[3] THE COMPUTER-AIDED MANUFACTURE OF CERAMICS USING MULTILAYER JET PRINTING
BLAZDELL, PF
EVANS, JRG
EDIRISINGHE, MJ
SHAW, P
BINSTEAD, MJ
[J]. JOURNAL OF MATERIALS SCIENCE LETTERS, 1995, 14 (22) : 1562 - 1565
[4] LAUDER A, 1992, MATER RES SOC SYMP P, V249, P331
[5] SACHS E, 1992, J ENG IND-T ASME, V114, P481
[6] Teng WD, 1997, J AM CERAM SOC, V80, P486
[7] The preparation of laminated ceramic composites using paint technology
Willoughby, CEP
Evans, JRG
[J]. JOURNAL OF MATERIALS SCIENCE, 1996, 31 (09) : 2333 - 2337
[8] Solid freeforming of ceramics using a drop-on-demand jet printer
Xiang, QF
Evans, JRG
Edirisinghe, MJ
Blazdell, PF
[J]. PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART B-JOURNAL OF ENGINEERING MANUFACTURE, 1997, 211 (03) : 211 - 214

← 1 →