Wear behavior and cutting performance of nanostructured hard coatings on cemented carbide cutting tools in hard milling

被引：73

作者：

Caliskan, Halil ^{[1
]}

Kurbanoglu, Cahit ^{[2
]}

Panjan, Peter ^{[3
]}

Cekada, Miha ^{[3
]}

Kramar, Davorin ^{[4
]}

机构：

[1] Bartin Univ, Dept Mech Engn, TR-74100 Bartin, Turkey

[2] Istanbul Medeniyet Univ, Dept Mech Engn, TR-34730 Istanbul, Turkey

[3] Jozef Stefan Inst, Dept Thin Films & Surfaces, Ljubljana 1000, Slovenia

[4] Univ Ljubljana, Fac Mech Engn, Ljubljana 1000, Slovenia

来源：

TRIBOLOGY INTERNATIONAL | 2013年 / 62卷

关键词：

Nanolayer and nanocomposite coating; Tool wear; Carbide cutting tool; Hard milling; NANOCOMPOSITE COATINGS; MECHANICAL-PROPERTIES; OXIDATION BEHAVIOR; CHIP FORMATION; THIN-FILMS; STEEL; PVD; MICROSTRUCTURE; RESISTANCE; LAYER;

D O I：

10.1016/j.triboint.2013.02.035

中图分类号：

TH [机械、仪表工业];

学科分类号：

120111 [工业工程];

摘要：

The influence of nanolayer AlTiN/TiN and multilayer nanocomposite TiAlSiN/TiSiN/TiAlN hard coatings on the wear behavior and cutting performance of carbide cutting tools was investigated in face milling of hardened AISI O2 cold work tool steel (similar to 58 HRC) at dry conditions. Characterization of the coatings was performed using nanoindentation, scratch test, reciprocating multi-pass wear test. The chips forming during cutting process were also analyzed. Results showed that abrasive and oxidation wear are dominant tool failures. The nanolayer AlTiN/TiN coating gives the best adhesion to the substrate, the best wear resistance in machining and thus provides the longest lifetime with carbide inserts. (C) 2013 Elsevier Ltd. All rights reserved.

引用

页码：215 / 222

页数：8

共 33 条

[1]

Deposition, microstructure and mechanical and tribological properties of magnetron sputtered TiN/TiAlN multilayers [J].

Andersen, KN ;

Bienk, EJ ;

Schweitz, KO ;

Reitz, H ;

Chevallier, J ;

Kringhoj, P ;

Bottiger, J .

SURFACE & COATINGS TECHNOLOGY, 2000, 123 (2-3) :219-226

[2]

Performance of new AlTiN coatings in dry and high speed cutting [J].

Arndt, M ;

Kacsich, T .

SURFACE & COATINGS TECHNOLOGY, 2003, 163 :674-680

[3]

Astakhov VP, 2006, TRIBOL INTER ENG, V52, P1

[4]

Ambient and elevated temperature properties of TiN, TiAlN and TiSiN PVD films and their impact on the cutting performance of coated carbide tools [J].

Bouzakis, K. -D. ;

Skordaris, G. ;

Gerardis, S. ;

Katirtzoglou, G. ;

Makrimallakis, S. ;

Pappa, M. ;

Lill, E. ;

M'Saoubi, R. .

SURFACE & COATINGS TECHNOLOGY, 2009, 204 (6-7) :1061-1065

[5]

Cahskan H, 2012, INT J ADV MANUF TECH, DOI [10.1007/s00170-012-4374-y, DOI 10.1007/S00170-012-4374-Y]

[6]

Machining performance of Ti-Al-Si-N coated inserts [J].

Chen, Li ;

Wang, She Q. ;

Du, Yong ;

Zhou, Shu Z. ;

Gang, Tie ;

Fen, Ji C. ;

Chang, Ke K. ;

Li, Yi W. ;

Xiong, Xiang .

SURFACE & COATINGS TECHNOLOGY, 2010, 205 (02) :582-586

[7]

Effect of Al content on microstructure and mechanical properties of Ti-Al-Si-N nanocomposite coatings [J].

Chen, Li ;

DuA, Yong ;

Wang, Ai J. ;

Wang, She Q. ;

Zhou, Shu Z. .

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS, 2009, 27 (04) :718-721

[8]

Childs T.H.C., 2000, METAL MACHINING THEO

[9]

Multilayered and nanolayered hard nitride thin films deposited by cathodic arc evaporation. Part 2: Mechanical properties and cutting performances [J].

Ducros, C. ;

Sanchette, F. .

SURFACE & COATINGS TECHNOLOGY, 2006, 201 (3-4) :1045-1052

[10]

Machinability of 90MnCrV8 steel during high-speed machining [J].

Ekinovic, S ;

Dolinsek, S ;

Begovic, E .

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 2005, 162 :603-608

← 1 2 3 4 →