Shear behavior of aluminum lattice truss sandwich panel structures

被引：63

作者：

Kooistra, Gregory W. ^{[1
]}

Queheillalt, Douglas T. ^{[1
]}

Wadley, Haydn N. G. ^{[1
]}

机构：

[1] Univ Virginia, Dept Mat Sci & Engn, Charlottesville, VA 22904 USA

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2008年 / 472卷 / 1-2期

关键词：

lattice structures; sandwich structures; aluminum alloys; brazing;

D O I：

10.1016/j.msea.2007.03.034

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Age hardenable 6061 aluminum tetrahedral lattice truss core sandwich panels have been fabricated by folding perforated sheets to form highly flexible cellular cores. Hat or curved sandwich panels can be fabricated by furnace brazing the cores to facesheets. Flat sandwich panels with core relative densities between 2 and 10% have been fabricated and tested in the sigma(+/- 13) shear orientation (minimum shear strength orientation for a tetrahedral lattice) in the fully annealed (O) and aged (T6) conditions. The shear strength of the lattices increased with relative density, parent alloy yield strength and work hardening rate. Analytical stiffness and strength predictions agree well with measured values for all relative densities and parent alloy heat treatments investigated. The stiffness and strength of 6061-T6 aluminum tetrahedral lattice structures are shown to be comparable to those of conventional 5052-H38 aluminum closed cell hexagonal honeycombs and more than 40% stiffer and stronger than flexible honeycombs used for the cores of curved sandwich panels. (c) 2007 Elsevier B.V. All rights reserved.

引用

页码：242 / 250

页数：9

共 55 条

[41] Actuation of the Kagome Double-Layer Grid. Part 1: Prediction of performance of the perfect structure [J].

Symons, DD ;

Hutchinson, RG ;

Fleck, NA .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2005, 53 (08) :1855-1874

[42] Actuation of the Kagome Double-Layer Grid. Part 2: Effect of imperfections on the measured and predicted actuation stiffness [J].

Symons, DD ;

Shieh, J ;

Fleck, NA .

JOURNAL OF THE MECHANICS AND PHYSICS OF SOLIDS, 2005, 53 (08) :1875-1891

[43]

Sypeck DJ, 2002, ADV ENG MATER, V4, P759, DOI 10.1002/1527-2648(20021014)4:10<759::AID-ADEM759>3.0.CO

[44]

2-A

[45] The effects of topology upon fluid-flow and heat-transfer within cellular copper structures [J].

Tian, J ;

Kim, T ;

Lu, TJ ;

Hodson, HP ;

Queheillalt, DT ;

Sypeck, DJ ;

Wadley, HNG .

INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 2004, 47 (14-16) :3171-3186

[46] Multifunctional periodic cellular metals [J].

Wadley, HNG .

PHILOSOPHICAL TRANSACTIONS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 2006, 364 (1838) :31-68

[47] Fabrication and structural performance of periodic cellular metal sandwich structures [J].

Wadley, HNG ;

Fleck, NA ;

Evans, AG .

COMPOSITES SCIENCE AND TECHNOLOGY, 2003, 63 (16) :2331-2343

[48] Defect sensitivity of a 3D truss material [J].

Wallach, JC ;

Gibson, LJ .

SCRIPTA MATERIALIA, 2001, 45 (06) :639-644

[49] Mechanical behavior of a three-dimensional truss material [J].

Wallach, JC ;

Gibson, LJ .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2001, 38 (40-41) :7181-7196

[50] On the performance of truss panels with Kagome cores [J].

Wang, J ;

Evans, AG ;

Dharmasena, K ;

Wadley, HNG .

INTERNATIONAL JOURNAL OF SOLIDS AND STRUCTURES, 2003, 40 (25) :6981-6988

← 1 2 3 4 5 6 →