Structural stability of indium oxide films deposited by spray pyrolysis during thermal annealing

被引：120

作者：

Korotcenkov, G ^{[1
]}

Brinzari, V ^{[1
]}

Ivanov, M ^{[1
]}

Cerneavschi, A ^{[1
]}

Rodriguez, J ^{[1
]}

Cirera, A ^{[1
]}

Cornet, A ^{[1
]}

Morante, J ^{[1
]}

机构：

[1] Univ Barcelona, Cemic, CeRMAE, Barcelona, Spain

来源：

THIN SOLID FILMS | 2005年 / 479卷 / 1-2期

关键词：

indium oxide; spray pyrolysis; films; annealing; structural properties;

D O I：

10.1016/j.tsf.2004.11.107

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The results of the analysis of In2O3 film properties' stability during thermal annealing in the temperature range from 500 to 1100 degrees C are presented in this article. In2O3 films were deposited by spray pyrolysis from 0.2 M InCl3-water solution. Annealing was carried out in the atmosphere of usual air. The change of parameters, such as film morphology, grain size, texture, intensity of cathodoluminescence, and Raman scattering, was controlled. For structural analysis of tested films, we used X-ray diffraction, scanning electron microscopy, and Atomic force microscopy techniques. It was determined that the change of In2O3 film structure during thermal treatment in oxygen-containing atmosphere goes through the following four standard stages of structure transformation of polycrystalline materials: the stage of structural stability of the film (25-500 degrees C); the stage of coalescence of grains forming agglomerates (500-700 degrees C); the stage of local structural reconstruction (700-1000 degrees C); and the stage of global (comprehensive) structural reconstruction (> 1000 degrees C). The influence of grain size (10-60 nm), film thickness (20-400 nm), and deposition parameters (T-pyr = 390-520 degrees C) on structural stability of In2O3 films is discussed as well. (c) 2004 Elsevier B.V. All rights reserved.

引用

页码：38 / 51

页数：14

共 34 条

[21]

Korotcenkov G., 2001, J MAT SCI ENG C, V19, P73

[22]

LEE JH, 1990, J AM CERAM SOC, V72, P2771

[23] Characterization of the oxidized indium thin films with thermal oxidation [J].