A study of packing profile on injection molded part quality

被引：18

作者：

Chen, X ^{[1
]}

Gao, F ^{[1
]}

机构：

[1] Hong Kong Univ Sci & Technol, Dept Chem Engn, Kowloon, Hong Kong, Peoples R China

来源：

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2003年 / 358卷 / 1-2期

关键词：

injection molding; packing profile; part quality;

D O I：

10.1016/S0921-5093(03)00290-9

中图分类号：

TB3 [工程材料学];

学科分类号：

0805 ; 080502 ;

摘要：

Proper setting of packing-holding pressure is important to injection molding quality. Influences of different types of packing profiles on part weight, shrinkage, flash, thickness distribution, and evenness are studied. Recommendations are made for specific improvements of these quality attributes by a proper profile type selection and determination. (C) 2003 Elsevier Science B.V. All rights reserved.

引用

页码：205 / 213

页数：9

共 18 条

[1]

BANDREDDI M, 1994, SPE ANTEC 94, P348

[2]

Chen X., 2002, THESIS HONG KONG U S

[3] PRESSURE BUILDUP DURING THE PACKING STAGE OF INJECTION-MOLDING [J].

CHUNG, TS .

POLYMER ENGINEERING AND SCIENCE, 1985, 25 (12) :772-777

[4] GENERAL CONSEQUENCES OF THE PACKING PHASE IN INJECTION-MOLDING [J].

GREENER, J .

POLYMER ENGINEERING AND SCIENCE, 1986, 26 (12) :886-892

[5]

HUNKAR DB, 1975, SPE ANTEC75, P161

[6] Effect of processing conditions on shrinkage in injection molding [J].

Jansen, KMB ;

Van Dijk, DJ ;

Husselman, MH .

POLYMER ENGINEERING AND SCIENCE, 1998, 38 (05) :838-846

[7] As-molded shrinkage measurements on polystyrene injection molded products [J].

Jansen, KMB ;

Pantani, R ;

Titomanlio, G .

POLYMER ENGINEERING AND SCIENCE, 1998, 38 (02) :254-264

[8]

LEO V, 1961, POLYM ENG SCI, V36, P1996

[9] Fuzzy multi-model based adaptive predictive control and its application to thermoplastic injection molding [J].

Li, MZ ;

Yang, Y ;

Gao, FR ;

Wang, FL .

CANADIAN JOURNAL OF CHEMICAL ENGINEERING, 2001, 79 (02) :263-272

[10]

MICHAELI W, 1989, ADV POLYM TECHNOL, V9, P337

← 1 2 →