A unity power factor correction preregulator with fast dynamic response based on a low-cost microcontroller

被引：55

作者：

Lamar, Diego G. ^{[1
]}

Fernandez, Arturo ^{[1
]}

Arias, Manuel ^{[1
]}

Rodriguez, Miguel ^{[1
]}

Sebastian, Javier ^{[1
]}

Hernando, Marta Maria ^{[1
]}

机构：

[1] Univ Oviedo, Grp Sistemas Elect Alimentac, Gijon 33204, Spain

来源：

IEEE TRANSACTIONS ON POWER ELECTRONICS | 2008年 / 23卷 / 02期

关键词：

EN; 61000-3-2; regulations; fast output voltage dynamics; modified sinusoidal reference; power factor correction (PFC);

D O I：

10.1109/TPEL.2007.915657

中图分类号：

TM [电工技术]; TN [电子技术、通信技术];

学科分类号：

0808 ; 0809 ;

摘要：

Low cost passive power factor correction (PFC) and single-stage PFC converters cannot draw a sinusoidal input current and are only suitable solutions to supply low power levels. PFC preregulators based on the use of a multiplier solve such drawbacks, but a second stage dc-dc converter is needed to obtain fast output voltage dynamics. The output voltage response of PFC preregulators can be improved by increasing the corner frequency of the output voltage feedback loop. The main drawback to obtaining a faster converter output response is the distortion of the input current. This paper describes a simple control strategy to obtain a sinusoidal input current. Based on the static analysis of output voltage ripple, a modified sinusoidal reference is created using a low cost microcontroller in order to obtain an input sinusoidal current. This reference replaces the traditional rectified sinusoidal input voltage reference in PFC preregulators with multiplier control. Using this circuitry, PFC preregulator topologies with galvanic isolation are suitable solutions to design a power supply with fast output voltage response (10 or 8.33 ms) and low line current distortion. Finally, theoretical and simulated results are validated using a 500 W prototype.

引用

页码：635 / 642

页数：8

共 14 条

[1]

DIXON H, 1990, UN SWITCH REG POW SU

[2]

FENANDEZ A, 2005, IEEE T IND ELECTRON, V52, P77

[3] Helpful hints to select a power-factor-correction solution for low- and medium-power single-phase power supplies [J].

Fernández, A ;

Sebastián, J ;

Hernando, MM ;

Villegas, P ;

García, J .

IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS, 2005, 52 (01) :46-55

[4] Single phase power factor correction:: A survey [J].

García, O ;

Cobos, JA ;

Prieto, R ;

Alou, P ;

Uceda, J .

IEEE TRANSACTIONS ON POWER ELECTRONICS, 2003, 18 (03) :749-755

[5] Single-stage single-switch input-current-shaping technique with reduced switching loss [J].

Huber, L ;

Jovanovic, MM .

IEEE TRANSACTIONS ON POWER ELECTRONICS, 2000, 15 (04) :681-687

[6] Design optimization of single-stage single-switch input-current shapers [J].

Huber, L ;

Jovanovic, MM .

IEEE TRANSACTIONS ON POWER ELECTRONICS, 2000, 15 (01) :174-184

[7] Merits and limitations of full-bridge rectifier with LC filter in meeting IEC 1000-3-2 harmonic-limit specifications [J].

Jovanovic, MM ;

Crow, DE .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 1997, 33 (02) :551-557

[8] Single-stage single-switch power-factor-correction AC/DC converters with DC-Bus voltage feedback for universal line applications [J].

Qian, JR ;

Zhao, Q ;

Lee, FC .

IEEE TRANSACTIONS ON POWER ELECTRONICS, 1998, 13 (06) :1079-1088

[9] Voltage-source charge-pump power-factor-correction AC/DC converters [J].

Qian, JR ;

Lee, FC .

IEEE TRANSACTIONS ON POWER ELECTRONICS, 1999, 14 (02) :350-358

[10] Input current shaper based on the series connection of a voltage source and a loss-free resistor [J].

Sebastián, J ;

Hernando, MM ;

Fernández, A ;

Villegas, PJ ;

Díaz, J .

IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, 2001, 37 (02) :583-591

← 1 2 →