Effect of preparation parameters on performance of dense homogeneous polycarbonate gas separation membranes

被引:37
作者
Hacarlioglu, P
Toppare, L
Yilmaz, L [1 ]
机构
[1] Middle E Tech Univ, Dept Chem Engn, TR-06531 Ankara, Turkey
[2] Middle E Tech Univ, Dept Chem, TR-06531 Ankara, Turkey
关键词
gas separation; membranes; polycarbonate;
D O I
10.1002/app.12505
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
The aim of this study is to determine the effect of preparation parameters on the membrane permeation mechanism and separation performances of dense homogeneous poly(bisphenol A carbonate) (PC) membranes. Blade-casting and drop-casting techniques are used for casting films from solutions with varying concentrations. Chloroform and methylene chloride are used to determine the effect of the properties of the casting solvent. Permeation measurements are done with Ar, N-2, O-2, CH4, CO2, and H, gases. The selectivity values of dense homogeneous membranes with a PC composition of 7% (w/v chloroform) are 1.7 for Ar/N-2, 1.1. for CH4/N-2, 18 for CO2/N-2, 26 for H-2/N-2, and 9.7 for O-2/N-2. These values with a PC composition of 15% (w/v methylene chloride) are 2.7, 1.3, 25, 44, and 13 for the same gases, respectively. In addition to the importance of the solvent type and composition, the casting type and thermal history also affects the performance of the membrane. Increasing the annealing period enhances the selectivity while decreasing the permeability for both casting solvents, yet this thermal history effect strongly depends on the solvent type because of solvent-polymer interactions. (C) 2003 Wiley Periodicals, Inc.
引用
收藏
页码:776 / 785
页数:10
相关论文
共 37 条
[11]  
GULSEN D, IN PRESS J MEMBR SCI
[12]   PERMEATION OF OXYGEN, ARGON AND NITROGEN THROUGH POLYMER MEMBRANES [J].
HARAYA, K ;
HWANG, ST .
JOURNAL OF MEMBRANE SCIENCE, 1992, 71 (1-2) :13-27
[13]   FLUORINATED POLYCARBONATES FOR GAS SEPARATION APPLICATIONS [J].
HELLUMS, MW ;
KOROS, WJ ;
HUSK, GR ;
PAUL, DR .
JOURNAL OF MEMBRANE SCIENCE, 1989, 46 (01) :93-112
[14]   Residual solvent effect on the permeation properties of fluorinated polyimide films [J].
Joly, C ;
Le Cerf, D ;
Chappey, C ;
Langevin, D ;
Muller, G .
SEPARATION AND PURIFICATION TECHNOLOGY, 1999, 16 (01) :47-54
[15]  
KAWABATA S, 1994, J MEMBRANE SCI, V91, P12
[16]   The morphology characterisation and performance of dense PPO membranes for gas separation [J].
Khulbe, KC ;
Matsuura, T ;
Lamarche, G ;
Kim, HJ .
JOURNAL OF MEMBRANE SCIENCE, 1997, 135 (02) :211-223
[17]   Characterization of the PPO dense membrane prepared at different temperatures by ESR, atomic force microscope and gas permeation [J].
Khulbe, KC ;
Chowdhury, G ;
Kruczek, B ;
Vujosevic, R ;
Matsuura, T ;
Lamarche, G .
JOURNAL OF MEMBRANE SCIENCE, 1997, 126 (01) :115-122
[18]  
KOROS WJ, 1992, ANNU REV MATER SCI, V22, P47
[19]   GAS SEPARATION MEMBRANE MATERIAL SELECTION CRITERIA - WEAKLY AND STRONGLY INTERACTING FEED COMPONENT SITUATIONS [J].
KOROS, WJ ;
WALKER, DRB .
POLYMER JOURNAL, 1991, 23 (05) :481-490
[20]   MEMBRANE-BASED GAS SEPARATION [J].
KOROS, WJ ;
FLEMING, GK .
JOURNAL OF MEMBRANE SCIENCE, 1993, 83 (01) :1-80