Flash Flow Pyrolysis: Mimicking Flash Vacuum Pyrolysis in a High-Temperature/High-Pressure Liquid-Phase Microreactor Environment

Flash vacuum pyrolysis (FVP) is a gas-phase continuous-flow technique where a substrate is sublimed through a hot quartz tube under high vacuum at temperatures of 400-1100 degrees C. Thermal activation occurs mainly by molecule-wall collisions with contact times in the region of milliseconds. As a preparative method, FVP is used mainly to induce intramolecular high-temperature transformations leading to products that cannot easily be obtained by other methods. It is demonstrated herein that liquid-phase high-temperature/high-pressure (high-T/p) microreactor conditions (160-350 degrees C, 90-180 bar) employing near- or supercritical fluids as reaction media can mimic the results obtained using preparative gas-phase FVP protocols. The high-T/p liquid-phase "flash flow pyrolysis" (FFP) technique was applied to the thermolysis of Meldrum's acid derivatives, pyrrole-2,3-diones, and pyrrole-2-carboxylic esters, producing the expected target heterocycles in high yields with residence times between 10 s and 10 min. The exact control over flow rate (and thus residence time) using the liquid-phase FFP method allows a tuning of reaction selectivities not easily achievable using FVP. Since the solution-phase FFP method does not require the substrate to be volatile any more -a major limitation in classical FVP-the transformations become readily scalable, allowing higher productivities and space-time yields compared with gas-phase protocols. Differential scanning calorimetry measurements and extensive DFT calculations provided essential information on pyrolysis energy barriers and the involved reaction mechanisms. A correlation between computed activation energies and experimental gas-phase FVP (molecule-wall collisions) and liquid-phase FFP (molecule-molecule collisions) pyrolysis temperatures was derived.