Absorption and reflection infrared spectra of MgO and other diatomic compounds

Oxide and sulphide minerals are expected to occur in diverse astronomical environments. However, optical constants for such minerals are either lacking or poorly characterized. Minimizing errors in laboratory data, while extrapolating over wide frequency ranges, is the focus of this report. We present reflection and absorption spectra of single-crystal MgO from about 100 to 18 000 cm(-1) (similar to100 to 0.5 mum), and derive emissivity, dielectric and optical functions (n and k) using classical dispersion analysis and supplementary data to ensure that the reflectivity values are correct at the low- and high-frequency limits. Absorbance spectra of thin films of oxides (MgO, CaO, FeO and ZnO) and sulphides (MgS, CaS and FeS) are in good agreement with available reflectivity measurements, and provide information on the various effects of chemical composition, structure and optical depth. The greatest mismatch occurs for MgO, connected with this compound having the broadest peak in reflectance. The ferrous compounds (FeO and FeS) have relatively weak infrared features and may be difficult to detect in astronomical environments. Previous optical data based on transmission spectra of dispersions have underestimated the strength of the main infrared features because this approach includes spectral artefacts that arise from the presence of opaque particulates, or from non-uniform optical depth. We show that areal coverage, not grain size, is the key factor in altering absorption spectra from the intrinsic values, and discuss how to account for 'light leakage' in interpreting astronomical data. Previous reflectivity data on polycrystals differ from intrinsic values because of the presence of additional, internal reflections, creating errors in the derived optical functions. We use classical dispersion analysis and supplemental data from optical microscopy to provide correct n- and k-values for FeO from the far-infrared to the visible, which can then be used in radiative transfer models. Thin-film absorption data are also affected by internal reflections in the transparent regions: we show how to recognize these features and how to obtain the absorption coefficient, n, and k from thin-film infrared data on CaO, CaS and MgS using the damped harmonic oscillator model.