Porous mullite preforms via fused deposition

被引:48
作者
Atisivan, R [1 ]
Bose, S [1 ]
Bandyopadhyay, A [1 ]
机构
[1] Washington State Univ, Sch Mech & Mat Engn, Pullman, WA 99164 USA
关键词
D O I
10.1111/j.1151-2916.2001.tb00635.x
中图分类号
TQ174 [陶瓷工业]; TB3 [工程材料学];
学科分类号
0805 [材料科学与工程]; 080502 [材料学];
摘要
Nonrandom porous mullite ceramic preforms were fabricated by the indirect fused deposition process, MgO was added to commercial mullite powders as a sintering aid. The influence of porosity and the amount of MgO on the densification and mechanical properties was studied. The shrinkage and compressive strength of the porous samples were found to increase with increasing MgO content. At constant MgO concentration, shrinkage was found to decrease linearly as the volume fraction of porosity increased. The compressive strength of porous samples decreased with an increase in the volume fraction of porosity at constant MgO content.
引用
收藏
页码:221 / 223
页数:3
相关论文
共 14 条
[1]
Agarwala MK, 1996, AM CERAM SOC BULL, V75, P60
[2]
BANDYOPADHYAY A, UNPUB MICROWAVE SINT
[3]
Processing of controlled porosity ceramic structures via fused deposition [J].
Bose, S ;
Suguira, S ;
Bandyopadhyay, A .
SCRIPTA MATERIALIA, 1999, 41 (09) :1009-1014
[4]
TISSUE INGROWTH OF REPLAMINEFORM IMPLANTS [J].
CHIROFF, RT ;
WHITE, EW ;
WEBER, JN ;
ROY, DM .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1975, 9 (04) :29-45
[5]
Galassi C, 1999, J AM CERAM SOC, V82, P3453
[6]
HASHIMOTO K, 1987, NIPPON SERAM KYO GAK, V95, P1037, DOI 10.2109/jcersj1950.95.1106_1037
[8]
Modeling of multiple pore ceramic materials fabricated via fused deposition process [J].
Hattiangadi, A ;
Bandyopadhyay, A .
SCRIPTA MATERIALIA, 2000, 42 (06) :581-588
[9]
ROLE OF MGO IN THE SINTERING OF ALUMINA [J].
HEUER, AH .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1979, 62 (5-6) :317-318
[10]
TISSUE REACTION TO 3 CERAMICS OF POROUS AND NON-POROUS STRUCTURES [J].
HULBERT, SF ;
MORRISON, SJ ;
KLAWITTER, JJ .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1972, 6 (05) :347-+