Studies on the low-velocity impact response of woven hybrid composites

被引：249

作者：

Hosur, MV ^{[1
]}

Adbullah, M ^{[1
]}

Jeelani, S ^{[1
]}

机构：

[1] Tuskegee Univ, Chappie James Ctr, Ctr Adv Mat, Tuskegee, AL 36088 USA

来源：

COMPOSITE STRUCTURES | 2005年 / 67卷 / 03期

基金：

美国国家科学基金会;

关键词：

low-velocity impact; hybrid composites; VARIM process;

D O I：

10.1016/j.compstruct.2004.07.024

中图分类号：

O3 [力学];

学科分类号：

08 ; 0801 ;

摘要：

In the current study, experimental investigations were carried out to determine the response of four different combinations of hybrid laminates to low-velocity impact loading using an instrumented impact testing machine. Hybrid laminates were fabricated with twill weave carbon fabric and plain weave S2-glass fabric using vacuum assisted resin molding process with SC-15 epoxy resin system. Response of carbon/epoxy and glass/epoxy laminates was also investigated to compare with that of hybrid samples. Square laminates of size 100mm and nominal thickness of 3mm were subjected to low-velocity impact loading at four energy levels of 10, 20. 30 and 40J. Results of the study indicate that there is considerable improvement in the load carrying capability of hybrid composites as compared to carbon/epoxy laminates with slight reduction in stiffness. (C) 2004 Elsevier Ltd. All rights reserved.

引用

页码：253 / 262

页数：10

共 24 条

[21] The mechanical performance of hybrid phenol-formaldehyde-based composites reinforced with glass and oil palm fibres [J].

Sreekala, MS ;

George, J ;

Kumaran, MG ;

Thomas, S .

COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (03) :339-353

[22] Penetration impact resistance of hybrid composites based on commingled yarn fabrics [J].

Thanomsilp, C ;

Hogg, PJ .

COMPOSITES SCIENCE AND TECHNOLOGY, 2003, 63 (3-4) :467-482

[23] Impact fracture toughness of short glass fiber-reinforced polyamide 6,6 hybrid composites containing elastomer particles using essential work of fracture concept [J].

Tjong, SC ;

Xu, SA ;

Mai, YW .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 2003, 347 (1-2) :338-345

[24] Mechanical behavior and fracture toughness evaluation of maleic anhydride compatibilized short glass fiber/SEBS/polypropylene hybrid composites [J].

Tjong, SC ;

Xu, SA ;

Li, RKY ;

Mai, YW .

COMPOSITES SCIENCE AND TECHNOLOGY, 2002, 62 (06) :831-840

← 1 2 3 →