Foaming in simulated radioactive waste

被引:22
作者
Bindal, SK
Nikolov, AD
Wasan, DT [1 ]
Lambert, DP
Koopman, DC
机构
[1] IIT, Dept Chem & Environm Engn, Chicago, IL 60616 USA
[2] Savannah River Technol Ctr, Aiken, SC 29808 USA
关键词
D O I
10.1021/es0106319
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
Radioactive waste treatment process usually involves concentration of radionuclides before waste can be immobilized by storing it in stable solid form. Foaming is observed at various stages of waste processing like SRAT (sludge receipt and adjustment tank) and melter operations. This kind of foaming greatly limits the process efficiency. The foam encountered can be characterized as a three-phase foam that incorporates finely divided solids (colloidal particles). The solid particles stabilize foaminess in two ways: by adsorption of biphilic particles at the surfaces of foam lamella and by layering of particles trapped inside the foam lamella. During bubble generation and rise, solid particles organize themselves into a layered structure due to confinement inside the foam lamella, and this structure provides a barrier against the coalescence of the bubbles, thereby causing foaming. Our novel capillary force balance apparatus was used to examine the particle-particle interactions, which affect particle layer formation in the foam lamella. Moreover, foaminess shows a maximum with increasing solid particle concentration. To explain the maximum in foaminess, a study was carried out on the simulated sludge, a non-radioactive simulant of the radioactive waste sludge at SRS, to identify the parameters that affect the foaming in a system characterized by the absence of surface-active agents. This three-phase foam does not show any foam stability unlike surfactant-stabilized foam. The parameters investigated were solid particle concentration, heating flux, and electrolyte concentration. The maximum in foaminess was found to be a net result of two countereffects; that arise due to particle-particle interactions: structural stabilization and depletion destabilization. It was found that higher electrolyte concentration causes a reduction in foaminess and leads to a smaller bubble size. Higher heating fluxes lead to greater foaminess due to an increased rate of foam lamella generation in the sludge system.
引用
收藏
页码:3941 / 3947
页数:7
相关论文
共 22 条
[11]  
NIKOLOV AD, 1990, PROG COLL POL SCI S, V82, P87
[12]   ORDERED MICELLE STRUCTURING IN THIN-FILMS FORMED FROM ANIONIC SURFACTANT SOLUTIONS .2. MODEL DEVELOPMENT [J].
NIKOLOV, AD ;
KRALCHEVSKY, PA ;
IVANOV, IB ;
WASAN, DT .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 1989, 133 (01) :13-22
[13]   ORDERED MICELLE STRUCTURING IN THIN-FILMS FORMED FROM ANIONIC SURFACTANT SOLUTIONS .1. EXPERIMENTAL [J].
NIKOLOV, AD ;
WASAN, DT .
JOURNAL OF COLLOID AND INTERFACE SCIENCE, 1989, 133 (01) :1-12
[14]   DISPERSION STABILITY DUE TO STRUCTURAL CONTRIBUTIONS TO THE PARTICLE INTERACTION AS PROBED BY THIN LIQUID-FILM DYNAMICS [J].
NIKOLOV, AD ;
WASAN, DT .
LANGMUIR, 1992, 8 (12) :2985-2994
[15]  
Oosawa F., 1954, J CHEM PHYS, V22, P1225
[16]  
PLODINE MJ, 1981, EL SOC C DENV OCT 11
[17]   REDOX CHEMISTRY IN CANDIDATE GLASSES FOR NUCLEAR WASTE IMMOBILIZATION [J].
SCHREIBER, HD ;
HOCKMAN, AL .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1987, 70 (08) :591-594
[18]   CORRELATION OF THE RHEOLOGY OF CONCENTRATED DISPERSIONS WITH INTERPARTICLE INTERACTIONS [J].
TADROS, TF ;
LIANG, W ;
COSTELLO, B ;
LUCKHAM, PF .
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS, 1993, 79 (01) :105-114
[19]  
TRACY EM, 1996, J NUCL MATER, V23, P19
[20]  
WASAN DT, 1998, ENV MAN SCI PROGR WO