Evaluation on the wear, tension and fatigue behavior of various PVD coated materials

被引:21
作者
Su, YL [1 ]
Yao, SH
Wei, CS
Wu, CT
Kao, WH
机构
[1] Natl Cheng Kung Univ, Dept Mech Engn, Tainan 70101, Taiwan
[2] Met Ind Res & Dev Ctr, Kaohsiung, Taiwan
关键词
endurance limit (fatigue limit); titanium nitride (TiN); titanium carbonitride (Ti(C; N)); chromium nitride (CrN); chromium carbonitride (Cr(C; carbonitride; (Cr(C;
D O I
10.1016/S0167-577X(97)00259-0
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A cylinder-on-plate line-contact reciprocated sliding testing machine and a tension-compression testing machine were used to compare the wear, tension and fatigue performance of the specimens with Ti-base and Cr-base coatings grown by physical vapor deposition process. The fracture mechanisms were examined utilizing a scanning electron microscope. The experimental results are as follows: The Cr-base coatings possessed far better wear resistance than the Ti-base coatings. The application of surface films did not affect the Young's modulus and yield points but did little decrease the fracture strains. For fatigue, the application of the surface coatings improved the endurance limit by 20-40 MPa. (C) 1998 Elsevier Science B.V. All rights reserved.
引用
收藏
页码:255 / 260
页数:6
相关论文
共 12 条
[1]  
CHEN YS, 1991, P SOC PHOTO-OPT INS, V1519, P56, DOI 10.1117/12.47221
[2]   TI(C,N) COATINGS USING THE ARC PROCESS [J].
ERTURK, E ;
KNOTEK, O ;
BURGMER, W ;
PRENGEL, HG ;
HEUVEL, HJ ;
DEDERICHS, HG ;
STOSSEL, C .
SURFACE & COATINGS TECHNOLOGY, 1991, 46 (01) :39-46
[3]   STUDY OF THE RELATIVE WEAR AND ABRASION RESISTANCE OF TI(C,N) AND TIN COATINGS [J].
GHOSH, SK ;
KOHLER, MS .
SURFACE & COATINGS TECHNOLOGY, 1992, 55 (1-3) :466-469
[4]   FATIGUE PERFORMANCE AND TRIBOLOGICAL PROPERTIES OF RF-SPUTTERED TIN COATINGS [J].
HERR, W ;
MATTHES, B ;
BROSZEIT, E ;
KLOOS, KH .
SURFACE & COATINGS TECHNOLOGY, 1993, 57 (01) :43-46
[5]   OXIDATION OF THIN CRN AND CR2N FILMS ANALYZED VIA NUCLEAR-REACTION ANALYSIS AND RUTHERFORD BACKSCATTERING SPECTROSCOPY [J].
KACSICH, T ;
LIEB, KP .
THIN SOLID FILMS, 1994, 245 (1-2) :4-6
[6]   CHARACTERIZATION OF CHROMIUM NITRIDE AND CARBONITRIDE COATINGS DEPOSITED AT LOW-TEMPERATURE BY ORGANOMETALLIC CHEMICAL VAPOR-DEPOSITION [J].
SCHUSTER, F ;
MAURY, F ;
NOWAK, JF ;
BERNARD, C .
SURFACE & COATINGS TECHNOLOGY, 1991, 46 (03) :275-288
[7]  
Shiozawa K., 1990, Journal of the Society of Materials Science, Japan, V39, P927, DOI 10.2472/jsms.39.927
[8]   Comparisons of characterizations and tribological performance of TIN and CrN deposited by cathodic arc plasma deposition process [J].
Su, YL ;
Yao, SH ;
Wu, CT .
WEAR, 1996, 199 (01) :132-141
[9]  
SU YL, 1996, IN PRESS WEAR
[10]  
TEETER FJ, 1993, CERAMIC COATING, V44, P87