Material ductility of very high strength (VHS) circular steel tubes in tension

被引：42

作者：

Jiao, H ^{[1
]}

Zhao, XL ^{[1
]}

机构：

[1] Monash Univ, Dept Civil Engn, Clayton, Vic 3168, Australia

来源：

THIN-WALLED STRUCTURES | 2001年 / 39卷 / 11期

基金：

澳大利亚研究理事会;

关键词：

ductility; failure modes; high strength steel; tubes; tension;

D O I：

10.1016/S0263-8231(01)00039-8

中图分类号：

TU [建筑科学];

学科分类号：

0813 ;

摘要：

This paper investigates the material ductility of very high strength (VHS) circular steel tubes under tension in terms of the ultimate strength to the yield stress ratio, the percentage elongation, the fracture to ultimate load ratio and the ultimate to yield strain ratio. 15 tensile coupon tests and 12 full section tests on VHS tubes were carried out. The tested VHS tubes have a diameter ranging from 31.8 mm. to 75 nim with wall thickness ranging from 1.6 mm, to 2.0 mm. The non-heat-treated tubes, which were used to make VHS tubes, were also tested for comparison purposes. Different failure modes were observed for VHS tubes and non-heat-treated tubes. The ultimate strength to yield stress ratio of VHS tubes was compared with that of various cold-formed hollow sections, sheet steels and quenched and tempered steels. The test results were compared with ductility requirements in various codes. It has shown that the VHS tubes satisfied the material ductility requirement specified in the Australian/New Zealand Standard for Cold-Formed Steel Structures AS/NZS4600. (C) 2001 Elsevier Science Ltd. All rights reserved.

引用

页码：887 / 906

页数：20

共 20 条

[11]

*SAA, 1998, 4100 AS SAA

[12]

*SAA, 1996, COLD FORM STEEL STRU

[13]

*SAA, 1991, AS1163 SAA

[14]

*SAA, 1993, 1397 AS SAA

[15]

*SAA, 1991, 1391 AS SAA

[16]

Zhao X. L., 1998, J CONSTRUCTIONAL STE, V46, P472

[17] Section capacity of very high strength (VHS) circular tubes under compression [J].

Zhao, XL .

THIN-WALLED STRUCTURES, 2000, 37 (03) :223-240

[18] BUTT WELDS AND TRANSVERSE FILLET WELDS IN THIN COLD-FORMED RHS MEMBERS [J].

ZHAO, XL ;

HANCOCK, GJ .

JOURNAL OF STRUCTURAL ENGINEERING-ASCE, 1995, 121 (11) :1674-1682

[19]

ZHAO XL, 1996, STEEL CONSTR, V30, P2

[20]

Zhao XL., 1991, Steel Constr, V25, P2

← 1 2 →