The emission and vertical flux of particulate matter <10 μm from a disturbed clay-crusted surface

被引:106
作者
Houser, CA [1 ]
Nickling, WG [1 ]
机构
[1] Univ Guelph, Dept Geog, Guelph, ON N1G 2W1, Canada
关键词
emission rate; PM(10); saltation transport; vertical dust flux;
D O I
10.1046/j.1365-3091.2001.00359.x
中图分类号
P5 [地质学];
学科分类号
0709 ; 081803 ;
摘要
Arid and semi-arid environments are important sources for the atmospheric loading of PM(10) (particulate matter < 10 mum), although the emission of this material is often limited by surface crusts. This study investigates the emission and vertical flux of PM(10) from a clay-crusted playa, with and without saltating grains to abrade the surface. Using a portable field wind tunnel, it was found that, despite disturbance to the surface, the emission of PM(10) decays rapidly without abrasion. Only in the presence of saltating grains was PM(10) continuously liberated from the surface, such that the emission rate (the total amount of PM(10) emitted from the surface expressed as a horizontal flux) varied linearly with the saltation transport rate. Although the emission of PM(10) was found to depend on saltation abrasion, past studies have tended to focus on the relationship between the vertical flux of PM(10) (the amount of PM(10) being transported vertically through the boundary layer) and the shear velocity. In this study, the vertical flux of PM(10) was found to vary with the shear velocity to the power of 2.14. Although the vertical PM(10) flux is a proportion of the emission rate (the horizontal flux), no statistically significant relationship was observed between the emission rate and the shear velocity. The disparity of these results is explained by the lack of a consistent relationship between the shear velocity and the saltation transport rate in this supply-limited environment. This suggests that the observed relationship between the vertical PM(10) flux and the shear velocity is a spurious correlation, resulting from the use of shear velocity to calculate the vertical dust flux. It is thus concluded that shear velocity is not an appropriate variable for emission modelling in supply-limited environments and that improvements in dust emission modelling will only be realized if the abrasion process is the focus of a concerted research effort.
引用
收藏
页码:255 / 267
页数:13
相关论文
共 44 条
[1]  
BAGNOLD RA, 1941, PHYSICS BLOWN SAND D
[2]  
Belnap J, 1997, LAND DEGRAD DEV, V8, P355, DOI 10.1002/(SICI)1099-145X(199712)8:4<355::AID-LDR266>3.0.CO
[3]  
2-H
[4]  
BORRMANN S, 1987, ATMOS ENVIRON, V9, P1891
[5]  
CLEMENTS T, 1963, E68 US ARM NAT LAB E
[6]   WIND-TUNNEL MEASUREMENTS OF THE RESUSPENSION OF IDEAL PARTICLES [J].
FAIRCHILD, CI ;
TILLERY, MI .
ATMOSPHERIC ENVIRONMENT, 1982, 16 (02) :229-238
[7]  
FRYREAR DW, 1981, 186 GEOL SOC AM, P253
[9]   THRESHOLD FRICTION VELOCITIES AND RUPTURE MODULI FOR CRUSTED DESERT SOILS FOR THE INPUT OF SOIL PARTICLES INTO THE AIR [J].
GILLETTE, DA ;
ADAMS, J ;
MUHS, D ;
KIHL, R .
JOURNAL OF GEOPHYSICAL RESEARCH-OCEANS, 1982, 87 (NC11) :9003-9015
[10]   Relation of vertical flux of particles smaller than 10 mu m to total aeolian horizontal mass flux at Owens Lake [J].
Gillette, DA ;
Fryrear, DW ;
Gill, TE ;
Ley, T ;
Cahill, TA ;
Gearhart, EA .
JOURNAL OF GEOPHYSICAL RESEARCH-ATMOSPHERES, 1997, 102 (D22) :26009-26015