Determination of kinetic equations of alkaline activation of blast furnace slag by means of calorimetric data

The alkaline activation of blast furnace slag promotes the formation of new cement materials. These materials have many advantages over ordinary Portland cement, including high strength, low production cost and good durability. However, many aspects of the chemistry of alkaline activated slags are not yet very well understood. Some authors consider that these processes occur through a heterogeneous reaction, and that they can be governed by three mechanisms: a) nucleation and growth of the hydrated phase; b) phase boundary interactions and c) any diffusion process though the layer of hydration products. The aim of this paper was to determine the mechanism explaining the early reaction of alkaline activation of a blast furnace slag through the use of calorimetric data. A granulated blast furnace slag from Aviles (Spain) with a specific surface of 4450 cm(2) g(-1) was used. The alkaline activators used were NaOH, Na2CO3 and a mix of waterglass (Na2SiO3. nH(2)O and NaOH. The solution concentrations were constant (4% Na2O with respect to the slag mass). The solutions were basic (pH 11-13). The mixes had a constant solution/slag ratio of 0.4. The thermal evolution of the mixes was monitored by conduction calorimetry. The test time was variable, until a rate of heat evolution equal to or less than 0.3 kJ kg(-1) h(-1) was attained. The working temperature was 25 degrees C. The degree of hydration (alpha) was determined by means of the heat of hydration after the induction period. The law governing the course of the reaction changes at a certain degree of hydration. From a generally accepted equation, the values of a at which the changes are produced were determined. These values of alpha depend on the nature of the alkaline activator. Nevertheless, for high values of alpha, the alkaline activation of slag occurs by a diffusion process.