Experimental characterization of water flow through smooth rectangular microchannels

This article presents experimental results obtained in water flows through smooth rectangular microchannels. The experimental setup used in the present study enabled the investigation of both very small length scales (21-4.5 mu m) and a wide range of Reynolds numbers (0.1-300). The evolution of the friction coefficient was inferred from pressure drop versus flow-rate measurements for two types of water with different electrical conductivities. The channels were made of a silicon engraved substrate anodically bonded to a Pyrex cover. In these structures, pressure losses were measured internally with micromachined C-u-N-i strain gauges. When compared to macroscale correlations, the results demonstrate that in smooth silicon-Pyrex microchannels larger than 4 mu m in height, the friction law is correctly predicted by the Navier-Stokes equations with the classical no-slip boundary conditions, regardless of the water electrical conductivity (> 0.1 mu S cm(-1)). (c) 2005 American Institute of Physics.