Impact of material properties of intervertebral disc on dynamic response of the human lumbar spine to vertical vibration: a finite element sensitivity study

This study aimed to determine the effect of variations in material properties of the intervertebral disc on dynamic response of the human lumbar spine to vertical vibration using a finite element model of the lumbar L1-S1 motion segment. The present material sensitivity study was conducted by varying elastic moduli for annulus ground substance (AGS), annulus fibers (AF), and nucleus pulposus (NP) in the disc. Transient dynamic analysis was performed initially on the model with basic material property under a sinusoidal vertical vibration load. Subsequently, the same analysis was done for each of the three disc components corresponding to high and low material property cases. The computed results were plotted as a function of time and compared. The AGS property displayed a larger impact on vertebral axial displacement and von Mises stress in AGS, and the AF property displayed a larger impact on disc bulge. In contrast, the NP property had little effect on all the response parameters. Additionally, the intradiscal pressure was found to be not sensitive to any of the disc properties. These findings may be helpful in adoption of appropriate material parameters for the intervertebral disc in finite element model of the lumbar spine used for vibration analysis.