Theoretical expression of rate of rise of recovery voltage across a circuit breaker connected with fault current limiter

被引:11
作者
Calixte, E [1 ]
Yokomizu, Y [1 ]
Shimizu, H [1 ]
Matsumura, T [1 ]
机构
[1] Nagoya Univ, Dept Elect Engn, Chikusa Ku, Nagoya, Aichi 4648603, Japan
基金
日本学术振兴会;
关键词
rate of rise of recovery voltage; fault current limiter; circuit breaker; interrupting condition;
D O I
10.1016/j.epsr.2004.11.007
中图分类号
TM [电工技术]; TN [电子技术、通信技术];
学科分类号
0808 ; 0809 ;
摘要
The present paper looks at the mathematical expression of the rate of rise of recovery voltage (rrrv) across a circuit breaker connected with fault current limiter (FCL) as a function of the limiting impedance Z(FCL) and the limited current when a fault occurs at a distance near the load-side terminals of the FCL. The FCL in current-limiting operation was assumed to have a limiting element composed of either an inductance or a resistance. In the model of the inductive FCL, a capacitance C, consisting of a coil stray capacitance and a necessary additional capacitance was taken into account. Using the mathematical expression of the relationship between the rrrv and the limited current enables us to find out the dependence of the interrupting duty on circuit parameters. Unlike the resistive FCL where the rrrv is linearly proportional to the limited current, the rrrv for the inductive FCL depends not only upon the limited current but also on the capacitance C-p and the stray capacitance C-FCL. of the FCL to the ground. Depending upon the kind of the FCL, the parameters of the FCL and the system, the general expression of the rrrv makes it possible to estimate the increasing or decreasing percentage of the rrrv across a circuit breaker connected with FCL. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:1 / 8
页数:8
相关论文
共 14 条
[11]   Principle and characteristics of a fault current limiter with series compensation [J].
Sugimoto, S ;
Kida, J ;
Arita, H ;
Fukui, C ;
Yamagiwa, T .
IEEE TRANSACTIONS ON POWER DELIVERY, 1996, 11 (02) :842-847
[12]   Quench in bulk HTS materials - application to the fault current limiter [J].
Tixador, P ;
Obradors, X ;
Tournier, R ;
Puig, T ;
Bourgault, D ;
Granados, X ;
Duval, JM ;
Mendoza, E ;
Chaud, X ;
Varesi, E ;
Beaugnon, E ;
Isfort, D .
SUPERCONDUCTOR SCIENCE & TECHNOLOGY, 2000, 13 (05) :493-497
[13]   SOLID-STATE CURRENT LIMITER FOR POWER DISTRIBUTION-SYSTEM [J].
UEDA, T ;
MORITA, M ;
ARITA, H ;
KIDA, J ;
KUROSAWA, Y ;
YAMAGIWA, T .
IEEE TRANSACTIONS ON POWER DELIVERY, 1993, 8 (04) :1796-1801
[14]  
1998, STANDARD JAPANESE EL