Synthesis and electrochemical properties of layer-structured 0.5Li(Ni0.5Mn0.5)O2-0.5Li(Li1/3Mn2/3)O2 solid mixture

被引:81
作者
Kang, SH [1 ]
Amine, K [1 ]
机构
[1] Argonne Natl Lab, Div Chem Engn, Electrochem Technol Program, Argonne, IL 60439 USA
关键词
Li-ion secondary batteries; layered structure; Li(Li; Ni; Mn)O-2; quenching;
D O I
10.1016/S0378-7753(03)00804-8
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
A 1: 1 mixture of electrochemically active Li(Ni0.5Mn0.5)O-2 and electrochemically inactive Li(Li1/3Mn2/3)O-2, i.e. Li(Li1/3Mn2/3)O-2, i.e. Li(Li0.17Ni0.25Mn0.58)O-2, has been synthesized by a sol-gel method. The mixture was calcined at 900 degreesC in air for 24 h and cooled at three different rates: quenched into liquid nitrogen, 2 degreesC/min, and 0.5 degreesC/min. It was found that the crystallographic structure and electrochemical properties of Li(Li0.17Ni0.25Mn0.58)O-2 highly depend on the cooling rate. The sample quenched into liquid nitrogen exhibited a long irreversible plateau at ca. 4.5 V during the first charge, and the discharge capacity gradually increased from 170 to 210 mAh/g after 40 cycles. The samples cooled at slower rates exhibited more monoclinic character and cubic spinel phase was observed; they showed no plateaus at 4.5 V during the first charge and the discharge capacities also gradually increased from 80 and 55 mAh/g to 130 and 85 mAh/g for 2 and 0.5 degreesC/min-cooled samples, respectively. (C) 2003 Elsevier B.V. All rights reserved.
引用
收藏
页码:533 / 537
页数:5
相关论文
共 20 条
[1]  
Ammundsen B, 2001, ADV MATER, V13, P943, DOI 10.1002/1521-4095(200107)13:12/13<943::AID-ADMA943>3.0.CO
[2]  
2-J
[3]   Synthesis of layered LiMnO2 as an electrode for rechargeable lithium batteries [J].
Armstrong, AR ;
Bruce, PG .
NATURE, 1996, 381 (6582) :499-500
[4]   Electrochemical cycling-induced spinel formation in high-charge-capacity orthorhombic LiMnO2 [J].
Jang, YI ;
Huang, BY ;
Wang, HF ;
Sadoway, DR ;
Chiang, YM .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1999, 146 (09) :3217-3223
[5]   Electrochemical and ex situ X-ray study of Li-(Li0.2Ni0.2Mn0.6)O2 cathode material for Li secondary batteries [J].
Kang, SH ;
Sun, YK ;
Amine, K .
ELECTROCHEMICAL AND SOLID STATE LETTERS, 2003, 6 (09) :A183-A186
[6]   Layered Li(Ni0.5-xMn0.5-xM′2x)O2 (M′ = Co, Al, Ti; x = 0, 0.025) cathode materials for Li-ion rechargeable batteries [J].
Kang, SH ;
Kim, J ;
Stoll, ME ;
Abraham, D ;
Sun, YK ;
Amine, K .
JOURNAL OF POWER SOURCES, 2002, 112 (01) :41-48
[7]   Structural characterization of Li[Li0.1Ni0.35Mn0.55]O2 cathode material for lithium secondary batteries [J].
Kim, JH ;
Yoon, CS ;
Sun, YK .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2003, 150 (04) :A538-A542
[8]   Layered xLiMO2 • (1-x)Li2M′O3 electrodes for lithium batteries:: a study of 0.95LiMn0.5Ni0.5O2 • 0.05Li2TiO3 [J].
Kim, JS ;
Johnson, CS ;
Thackeray, MM .
ELECTROCHEMISTRY COMMUNICATIONS, 2002, 4 (03) :205-209
[9]   Layered cathode materials Li[NixLi(1/3-2x/3)Mn(2/3-x/3)]O2 for lithium-ion batteries [J].
Lu, ZH ;
MacNeil, DD ;
Dahn, JR .
ELECTROCHEMICAL AND SOLID STATE LETTERS, 2001, 4 (11) :A191-A194
[10]   Understanding the anomalous capacity of Li/Li[NixLi(1/3-2x/3)Mn(2/3-x/3]O2 cells using in situ X-ray diffraction and electrochemical studies [J].
Lu, ZH ;
Dahn, JR .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2002, 149 (07) :A815-A822