The effects of job rotation on the risk of reporting low back pain

被引:72
作者
Frazer, MB [1 ]
Norman, RW
Wells, RP
Neumann, WP
机构
[1] Univ Waterloo, Fac Appl Hlth Sci, Dept Kinesiol, Waterloo, ON N2L 3G1, Canada
[2] Natl Inst Working Life W, Gothenburg, Sweden
[3] Lund Tech Univ, Dept Design Sci, Lund, Sweden
关键词
job rotation; low back; biomechanical model; cumulative loading; administrative control;
D O I
10.1080/001401303000090161
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
Job rotation has been widely recommended as an administrative control to reduce the risk of developing work-related musculoskeletal disorders. However, evidence of its benefits are hard to find in the literature. The effect of job rotation on predictions for the risk of reporting low back pain was estimated using Low Back Pain Reporting (LBPR) and Time Weighted Average (TWA) approaches. Index scores calculated using the peak hand force, the peak L4/L5 shear force and the L4/L5 moment cumulated over the entire shift were used to estimate the effects of job rotation on the probability of reporting low back pain. Simulations of realistic rotations between two jobs showed that workers in low demand jobs who rotate into higher demand jobs experience a linear increase in reporting probability using the TWA approach. With the LBPR approach a step increase in reporting probability occurred because of the immediate exposure to the peak loading parameters associated with the more demanding job. With a 50-50 rotation the TWA and LBPR index scores increased by 39% and 57%, respectively. With the LBPR approach the redistribution of risk was not uniform with job rotation. The increase was greater for those who rotated into the demanding job compared to the reduction experienced by those who rotated out of the demanding job. The effects of job rotation are not easily estimated because of the complex effect that mixing jobs has on peak and cumulative tissue loading.
引用
收藏
页码:904 / 919
页数:16
相关论文
共 27 条
[1]  
ADAMS MA, 1985, SPINE, V15, P311
[2]   The accuracy of self-report and trained observer methods for obtaining estimates of peak load information during industrial work [J].
Andrews, DM ;
Norman, RW ;
Wells, RP ;
Neumann, P .
INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 1997, 19 (06) :445-455
[3]  
[Anonymous], 1991, APPL OCCUP ENVIRON H, DOI DOI 10.1080/1047322X.1991.10387896
[4]  
[Anonymous], INT J IND ERG, DOI DOI 10.1016/0169-8141(91)90037-M
[5]  
Cosgel MM, 1999, J INST THEOR ECON, V155, P301
[6]  
*FASC, 1986, CAN STAND TEST FITN
[7]   Comparison of different organisations of assembly work in the European automotive industry [J].
Freiboth, M ;
Frieling, E ;
Henniges, D ;
Saager, C .
INTERNATIONAL JOURNAL OF INDUSTRIAL ERGONOMICS, 1997, 20 (05) :357-370
[8]   Conditions for maintaining ageing operators at work - a case study conducted at an automobile manufacturing plant [J].
Gaudart, C .
APPLIED ERGONOMICS, 2000, 31 (05) :453-462
[9]  
GRANT KA, 1997, APPL OCCUPATIONAL EN, V12, P253
[10]   MECHANICAL-BEHAVIOR OF THE HUMAN LUMBAR SPINE .2. FATIGUE-STRENGTH DURING DYNAMIC COMPRESSIVE LOADING [J].
HANSSON, TH ;
KELLER, TS ;
SPENGLER, DM .
JOURNAL OF ORTHOPAEDIC RESEARCH, 1987, 5 (04) :479-487