Nucleation and growth of calcium phosphate on amine-, carboxyl- and hydroxyl-silane self-assembled monolayers

被引:261
作者
Toworfe, GK
Composto, RJ
Shapiro, IM
Ducheyne, P
机构
[1] Univ Penn, Ctr Bioact Mat & Tissue Engn, Dept Bioengn, Sch Engn & Appl Sci, Philadelphia, PA 19104 USA
[2] Univ Penn, Dept Mat Sci & Engn, Philadelphia, PA 19104 USA
[3] Thomas Jefferson Univ Hosp, Dept Orthopaed Surg, Philadelphia, PA 19107 USA
关键词
self-assembled monolayers; calcium phosphate; apatite; bone; precipitation;
D O I
10.1016/j.biomaterials.2005.06.017
中图分类号
R318 [生物医学工程];
学科分类号
0831 ;
摘要
Upon implantation, calcium phosphate (Ca-P) surfaces form on materials that are bone bioactive. In this study, the evolving surface characteristics associated with calcium phosphate precipitation are modeled using self-assembled monolayers (SAMs), in a one-step nucleation process. SAMs were used to create amine (-NH2), carboxyl (-COOH) and hydroxyl (-OH) functionalized surfaces by grafting 3-aminopropyltriethoxysilane, 3-triethoxysilylpropyl succinic anhydride and glycidoxypropyl tri-methoxysilane, respectively, onto oxidized silicon wafers. The SAM surfaces were characterized using ellipsometry to establish the presence of grafted molecules. On the surfaces incubated in simulated physiological fluids for 7 days, the thickness of Ca-P layer grew slowly over the first few hours, increasing strongly between 1 and 5 days and then slowed down again. FTIR showed the dependence of calcium phosphate morphology on the type of surface groups, with stronger P-O bands seen on the OH-terminated surface. SEM analysis showed dispersed Ca-P precipitates on the -COOH and -OH terminated surfaces after I day immersion. After 7 days, all SAM surfaces were covered with uniformly dispersed and denser Ca-P precipitates. The underlying Ca-P layer showed cracks on the -NH2-terminated surface. Rutherford backscattering spectrometry (RBS) data analysis confirmed that Ca/P ratio is in excellent agreement with the theoretical value of 1.67 for hydroxyapatite. X-ray diffraction (XRD) analysis also showed evidence of apatite formation on all the surfaces, with stronger evidence on the -OH-terminated surface. Highly porous Ca-P precipitates were observed on the SAM surfaces portrayed by the AFM scans with nanoscale RMS roughness. Thus, using highly controlled surface chemistry, under physiological conditions, in vitro, this study demonstrates that a hydroxylated surface enhances Ca-P nucleation and growth relative to other surfaces, thereby supporting the concept of its beneficial effect on bone tissue formation and growth. (c) 2005 Elsevier Ltd. All rights reserved.
引用
收藏
页码:631 / 642
页数:12
相关论文
共 68 条
[1]   AN ULTRASTRUCTURAL CHARACTERIZATION OF THE INTERFACE BETWEEN BONE AND SPUTTERED TITANIUM OR STAINLESS-STEEL SURFACES [J].
ALBREKTSSON, T ;
HANSSON, HA .
BIOMATERIALS, 1986, 7 (03) :201-205
[2]   THE INTERFACE ZONE OF INORGANIC IMPLANTS INVIVO - TITANIUM IMPLANTS IN BONE [J].
ALBREKTSSON, T ;
BRANEMARK, PI ;
HANSSON, HA ;
KASEMO, B ;
LARSSON, K ;
LUNDSTROM, I ;
MCQUEEN, DH ;
SKALAK, R .
ANNALS OF BIOMEDICAL ENGINEERING, 1983, 11 (01) :1-27
[3]  
Campbell AA, 2000, J BIOMED MATER RES, V53, P400, DOI 10.1002/1097-4636(2000)53:4<400::AID-JBM14>3.0.CO
[4]  
2-Z
[5]   Application of ion scattering techniques to characterize polymer surfaces and interfaces [J].
Composto, RJ ;
Walters, RM ;
Genzer, J .
MATERIALS SCIENCE & ENGINEERING R-REPORTS, 2002, 38 (3-4) :107-180
[6]  
COOK SD, 1988, CLIN ORTHOP RELAT R, V230, P303
[7]  
de Groot K, 2000, MATER RES SOC SYMP P, V599, P109
[8]   PLASMA SPRAYED COATINGS OF HYDROXYLAPATITE [J].
DEGROOT, K ;
GEESINK, R ;
KLEIN, CPAT ;
SEREKIAN, P .
JOURNAL OF BIOMEDICAL MATERIALS RESEARCH, 1987, 21 (12) :1375-1381
[9]  
DHERT WJA, 1994, MED PROG TECHNOL, V20, P143
[10]   CALCIUM-PHOSPHATE CERAMIC COATINGS ON POROUS TITANIUM - EFFECT OF STRUCTURE AND COMPOSITION ON ELECTROPHORETIC DEPOSITION, VACUUM SINTERING AND INVITRO DISSOLUTION [J].
DUCHEYNE, P ;
RADIN, S ;
HEUGHEBAERT, M ;
HEUGHEBAERT, JC .
BIOMATERIALS, 1990, 11 (04) :244-254