Mechanical properties of DLC films prepared in acetylene and methane plasmas using electron cyclotron resonance microwave plasma chemical vapor deposition

Diamond-like carbon (DLC) films were deposited on silicon using methane and acetylene plasma induced by electron cyclotron resonance microwave plasma chemical vapor deposition (ECR-MPCVD). The mechanical properties of DLC films were characterized by micro-Raman system, atomic force microscope, tribometer, nano-indenter used for both hardness and nano-scratch test measurements. The mechanical properties of both DLC films, prepared in methane and acetylene plasmas, respectively, strongly depended on the kinetic energy of impinging particles. The deposition at - 120 V substrate bias gave rise to DLC films with the best mechanical properties for both methane and acetylene plasmas. The hardness measurements with variable indentation depth showed the characteristic changes in hardness values implying elastic deformations of supporting substrates. The maximum hardness value of DLCM films was 20 GPa while that of DLCA films was 28 GPa. However, the hardness dropped when DLC films were prepared at substrate biases more negative than - 120 V due to the thermal graphitization. The improvement in DLC properties usually provided the films with smaller hydrogen content and higher density of SP3 bondings. These parameters were engineered through controlling the deposition parameters. Particularly, the bombardment of growing DLC films by energetic ions showed to be extremely important to yield films with lower internal stress. (C) 2001 Elsevier Science B.V. All rights reserved.