Using printing and molding techniques to produce distributed feedback and Bragg reflector resonators for plastic lasers

被引：74

作者：

Rogers, JA ^{[1
]}

Meier, M ^{[1
]}

Dodabalapur, A ^{[1
]}

机构：

[1] AT&T Bell Labs, Lucent Technol, Murray Hill, NJ 07974 USA

来源：

APPLIED PHYSICS LETTERS | 1998年 / 73卷 / 13期

关键词：

D O I：

10.1063/1.122275

中图分类号：

O59 [应用物理学];

学科分类号：

摘要：

We describe the use of low cost printing and molding techniques to fabricate distributed feedback and Bragg reflector resonators for photoexcited plastic lasers that have narrow emission profiles in the visible range. The good performance of the lasers demonstrates the suitability of these techniques for fabricating certain types of functional optoelectronic devices that require submicron features patterned over macroscopic areas. (C) 1998 American Institute of Physics. [S0003-6951(98)01039-0].

引用

页码：1766 / 1768

页数：3

共 22 条

[1] SUBMICROMETER RESOLUTION REPLICATION OF RELIEF PATTERNS FOR INTEGRATED OPTICS
AUMILLER, GD
CHANDROS.EA
TOMLINSO.WJ
WEBER, HP
[J]. JOURNAL OF APPLIED PHYSICS, 1974, 45 (10) : 4557 - 4562
[2] Organic lasers based on lithographically defined photonic-bandgap resonators
Berggren, M
Dodabalapur, A
Slusher, RE
Bao, Z
Timko, A
Nalamasu, O
[J]. ELECTRONICS LETTERS, 1998, 34 (01) : 90 - 91
[3] Organic solid-state lasers with imprinted gratings on plastic substrates
Berggren, M
Dodabalapur, A
Slusher, RE
Timko, A
Nalamasu, O
[J]. APPLIED PHYSICS LETTERS, 1998, 72 (04) : 410 - 411
[4] IMPRINT OF SUB-25 NM VIAS AND TRENCHES IN POLYMERS
CHOU, SY
KRAUSS, PR
RENSTROM, PJ
[J]. APPLIED PHYSICS LETTERS, 1995, 67 (21) : 3114 - 3116
[5] PRECISE DEPOSITION OF MOLTEN MICRODROPS - THE PHYSICS OF DIGITAL MICROFABRICATION
GAO, FQ
SONIN, AA
[J]. PROCEEDINGS OF THE ROYAL SOCIETY OF LONDON SERIES A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, 1994, 444 (1922): : 533 - 554
[6] Ink-jet printing of doped polymers for organic light emitting devices
Hebner, TR
Wu, CC
Marcy, D
Lu, MH
Sturm, JC
[J]. APPLIED PHYSICS LETTERS, 1998, 72 (05) : 519 - 521
[7] HU J, 1995, APPL PHYS LETT, V71, P2020
[8] FEATURES OF GOLD HAVING MICROMETER TO CENTIMETER DIMENSIONS CAN BE FORMED THROUGH A COMBINATION OF STAMPING WITH AN ELASTOMERIC STAMP AND AN ALKANETHIOL INK FOLLOWED BY CHEMICAL ETCHING
KUMAR, A
WHITESIDES, GM
[J]. APPLIED PHYSICS LETTERS, 1993, 63 (14) : 2002 - 2004
[9] Qin D, 1998, TOP CURR CHEM, V194, P1
[10] Using microcontact printing to generate amplitude photomasks on the surfaces of optical fibers: A method for producing in-fiber gratings
Rogers, JA
Jackman, RJ
Whitesides, GM
Wagener, JL
Vengsarkar, AM
[J]. APPLIED PHYSICS LETTERS, 1997, 70 (01) : 7 - 9

← 1 2 3 →