Using coarse-grained entropy rate to detect chatter in cutting

被引：55

作者：

Gradisek, J ^{[1
]}

Govekar, E ^{[1
]}

Grabec, I ^{[1
]}

机构：

[1] Univ Ljubljana, Fac Mech Engn, SI-1000 Ljubljana, Slovenia

来源：

JOURNAL OF SOUND AND VIBRATION | 1998年 / 214卷 / 05期

关键词：

D O I：

10.1006/jsvi.1998.1632

中图分类号：

O42 [声学];

学科分类号：

070206 ; 082403 ;

摘要：

A new method for chatter detection in turning on a lathe is introduced. It exploits a significant change of cutting dynamics caused by the onset of chatter. The changes are reflected in both dynamical and statistical characteristics. Experimentally, the transition from chatter-free cutting to chatter was achieved by a change of either cutting depth or turning frequency. For the characterization of cutting dynamics the coarse-grained entropy rate is applied. A high value of the entropy rate is typical for chatter-free cutting, while for chatter a low value is typical. For the purpose of chatter detection the normalized value of the entropy rate is used and a characteristic threshold is defined. The value of the threshold is independent of cutting conditions. In addition to chatter detection, the entropy rate is applicable for qualitative physical interpretation of cutting process properties. (C) 1998 Academic Press.

引用

页码：941 / 952

页数：12

共 16 条

[1] Cutting state identification [J].

Berger, BS ;

Minis, I ;

Rokni, M ;

Papadopoulos, M ;

Deng, K ;

Chavalli, A .

JOURNAL OF SOUND AND VIBRATION, 1997, 200 (01) :15-29

[2]

BERGER BS, 1998, UNPUB J SOUND VIBRAT

[3] USE OF AUDIO SIGNALS FOR CHATTER DETECTION AND CONTROL [J].

DELIO, T ;

TLUSTY, J ;

SMITH, S .

JOURNAL OF ENGINEERING FOR INDUSTRY-TRANSACTIONS OF THE ASME, 1992, 114 (02) :146-157

[4]

GRADISEK J, 1997, THESIS U LJUBLJANA S

[5] TIME-SERIES BASED ANALYSIS FOR PRIMARY CHATTER IN METAL-CUTTING [J].

KHRAISHEH, MK ;

PEZESHKI, C ;

BAYOUMI, AE .

JOURNAL OF SOUND AND VIBRATION, 1995, 180 (01) :67-87

[6] Tool wear and chatter detection using the coherence function of two crossed accelerations [J].

Li, XQ ;

Wong, YS ;

Nee, AYC .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1997, 37 (04) :425-435

[7] A new on-line spindle speed regulation strategy for chatter control [J].

Liao, YS ;

Young, YC .

INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE, 1996, 36 (05) :651-660

[8] Improved methods for the prediction of chatter in turning, part 1. Determination of structural response parameters [J].

Minis, I.E. ;

Magrab, E.B. ;

Pandelidis, I.O. .

Journal of engineering for industry, 1990, 112 (01) :12-20

[9] On entropy rates of dynamical systems and Gaussian processes [J].

Palus, M .

PHYSICS LETTERS A, 1997, 227 (5-6) :301-308

[10] Coarse-grained entropy rates for characterization of complex time series [J].

Palus, M .

PHYSICA D-NONLINEAR PHENOMENA, 1996, 93 (1-2) :64-77

← 1 2 →