Synthesis and Characterization of Polyimides Derived from Novel 1,3-Bis(4-aminophenoxy)Benzene

被引：3

作者：

Chao, Min ^{[1
]}

Kou, Kai Chang ^{[1
]}

Wang, Zhi Chao ^{[1
]}

Wu, Guang Lei ^{[1
]}

Zhang, Dong Na ^{[1
]}

Zhang, Jiao Qiang ^{[1
]}

机构：

[1] NW Polytech Univ, Sch Sci, Xian 710129, Peoples R China

来源：

ADVANCES IN MECHANICAL DESIGN, PTS 1 AND 2 | 2011年 / 199-200卷

关键词：

Diamine; High Purity; Imidization; Polyimides; Thermal Stability; A-BPDA; DIANHYDRIDE; MEMBRANE; PROPERTY; FILMS;

D O I：

10.4028/www.scientific.net/AMR.199-200.13

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A novel aromatic ether diamine 1,3-bis(4-aminophenoxy)benzene (TPER) was synthesized. Four kinds of polyimides were prepared with obtained TPER, 4,4'-diaminodiphenyl(ODA), pyromellitic dianhydride (PMDA) and end capped with phthalic anhydride(PA). The imidization process was solution imidization followed by solid-phase thermal imidization. The results of DSC, (1)H-NMR and FTIR analysis showed that high purity TPER had been successfully synthesized. FTIR spectras of polyimides indicated the imidization process could reduce the final imidization temperature. The inherent viscosities([eta]) showed molecular weight could be controlled via the introduction of flexible diamine and end capping agent. And all polyimides exhibited excellent thermal stability.

引用

页码：13 / 18

页数：6

共 17 条

[1]

Adrova N.A., 1970, Polyimides, A New Class of Thermally Stable Polymers

[2] SYNTHESIS, CHARACTERIZATION AND PROPERTIES OF POLYIMIDES FROM 3,3',4,4'-BENZOPHENONETETRACARBOXYLIC DIANHYDRIDE AND IMIDAZOLE-BLOCKED 2,5-BIS[(N-ALKYLOXY)METHYL]-1,4-BENZENEDIISOCYANATES [J].

JUNG, JC ;

PARK, SB .

POLYMER BULLETIN, 1995, 35 (04) :423-430

[3] Preparation of novel polyimides with high thermal stability of dipole alignment for electro-optic applications [J].

Kim, Jin-Hyang ;

Jang, Han-Na ;

Lee, Ju-Yeon .

POLYMER BULLETIN, 2008, 60 (2-3) :181-189

[4]

KUMAR D, 1992, POLYM ADVAN TECHNOL, V3, P1

[5] Melt-processable thermosetting polyimide: Synthesis, characterization, fusibility, and property [J].

Kuroki, T ;

Shibuya, A ;

Toriida, M ;

Tamai, S .

JOURNAL OF POLYMER SCIENCE PART A-POLYMER CHEMISTRY, 2004, 42 (10) :2395-2404

[6] Synthesis and characterization of polyimides from 1,4-bis[4-(n-alkyloxy)phenyloxy]pyromellitic dianhydrides and 4,4′-oxydianiline [J].

Lee, KH ;

Jung, JC .

POLYMER BULLETIN, 1998, 40 (4-5) :407-414

[7] NEW HIGH-PERFORMANCE THERMOSETTING POLYMER MATRIX MATERIAL SYSTEMS [J].

MEYER, GW ;

PAK, SJ ;

LEE, YJ ;

MCGRATH, JE .

POLYMER, 1995, 36 (11) :2303-2309

[8] Preparation and characterization of a polyimide membrane [J].

Niyogi, S ;

Adhikari, B .

EUROPEAN POLYMER JOURNAL, 2002, 38 (06) :1237-1243

[9] Membrane characterisation by SEM, TEM and ESEM: The implications of dry and wetted microstructure on mass transfer through integrally skinned polyimide nanofiltration membranes [J].

Patterson, Darrell A. ;

Havill, Alice ;

Costello, Sarah ;

See-Toh, Yoong Hsiang ;

Livingston, Andrew G. ;

Turner, Adrian .

SEPARATION AND PURIFICATION TECHNOLOGY, 2009, 66 (01) :90-97

[10] Humidity-dependent mechanical properties of polyimide films and their use for IC-compatible humidity sensors [J].

Sager, K ;

Schroth, A ;

Nakladal, A ;

Gerlach, G .

SENSORS AND ACTUATORS A-PHYSICAL, 1996, 53 (1-3) :330-334

← 1 2 →