Grain growth and kinetics for nanocrystalline magnesium alloy produced by mechanical alloying

被引：61

作者：

Cao, P ^{[1
]}

Lu, L ^{[1
]}

Lai, MO ^{[1
]}

机构：

[1] Natl Univ Singapore, Dept Engn, Singapore 119260, Singapore

来源：

MATERIALS RESEARCH BULLETIN | 2001年 / 36卷 / 5-6期

关键词：

alloys; X-ray diffraction;

D O I：

10.1016/S0025-5408(01)00578-5

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

A study on the kinetics of grain growth of an Mg-12.1 wt%Cu alloy produced by mechanical alloying was carried out. The grain sizes of as-mechanically alloyed powder and of cold-compacted annealed powder were determined from the broadening of X-ray lines. The grain size deceases initially due to recrystallization and then increases gradually, and finally ceases to reach an ultimate value regardless of annealing time. From isothermal anneals, the grain growth kinetics can be described by D-n - D-0(n) = ct, where n (n = 5 to 8) is a constant essentially dependent on the annealing temperature. The activation energy for grain growth Q has been determined to be 118 kJ/mol, which is longer by 26 kJ/mol than that for pure magnesium. Second-phase intermetallic particle Mg2Cu produced during ball-milling influences not only on activation energy but also on exponent of the kinetic equation. (C) 2001 Elsevier Science Ltd. All rights reserved.

引用

页码：981 / 988

页数：8

共 24 条

[11] Synthesis of nanostructured materials by mechanical milling: Problems and opportunities [J].

Koch, CC .

NANOSTRUCTURED MATERIALS, 1997, 9 (1-8) :13-22

[12] PREPARATION OF AMORPHOUS NI60NB40 BY MECHANICAL ALLOYING [J].

KOCH, CC ;

CAVIN, OB ;

MCKAMEY, CG ;

SCARBROUGH, JO .

APPLIED PHYSICS LETTERS, 1983, 43 (11) :1017-1019

[13] HIGH-TEMPERATURE PERFORMANCE OF DISPERSION-STRENGTHENED AL-TI ALLOYS PREPARED BY MECHANICAL ALLOYING [J].

LEE, KM ;

MOON, IH .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1994, 185 (1-2) :165-170

[14] Nanocrystalline metals crystallized from amorphous solids: Nanocrystallization, structure, and properties [J].

Lu, K .

MATERIALS SCIENCE & ENGINEERING R-REPORTS, 1996, 16 (04) :161-221

[15] Formation of nanocrystalline Mg2Si and Mg2Si dispersion strengthened Mg-Al alloy by mechanical alloying [J].

Lu, L ;

Lai, MO ;

Hoe, ML .

NANOSTRUCTURED MATERIALS, 1998, 10 (04) :551-563

[16] Grain growth in nanocrystalline iron prepared by mechanical attrition [J].

Malow, TR ;

Koch, CC .

ACTA MATERIALIA, 1997, 45 (05) :2177-2186

[17] MICROSTRUCTURE AND STRENGTH OF NANOCRYSTALLINE COPPER ALLOY PREPARED BY MECHANICAL ALLOYING [J].

MORRIS, DG ;

MORRIS, MA .

ACTA METALLURGICA ET MATERIALIA, 1991, 39 (08) :1763-1770

[18] Stability of a nanocrystalline structure in TiAl-based alloys [J].

Senkov, ON ;

Övecoglu, ML ;

Srisukhumbowornchai, N ;

Froes, FH .

NANOSTRUCTURED MATERIALS, 1998, 10 (06) :935-945

[19] SYNTHESIS AND PROPERTIES OF NANOPHASE MATERIALS [J].

SIEGEL, RW .

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1993, 168 (02) :189-197

[20]

SIEGEL RW, 1993, NANOSTRUCT MATER, V3, P1, DOI 10.1016/0965-9773(93)90058-J

← 1 2 3 →