Performance, reliability and failure analysis of wind farm in a developing Country

被引:60
作者
Herbert, G. M. Joselin [2 ]
Iniyan, S. [1 ]
Goic, Ranko [3 ]
机构
[1] Anna Univ, Dept Mech Engn, Inst Energy Studies, Madras 600025, Tamil Nadu, India
[2] Noorul Islam Univ, Dept Mech Engn, Kumaracoil, Thackalay, India
[3] Univ Split, Fac Elect Engn Mech Engn & Naval Architecture, Split, Croatia
关键词
Wind turbine generators; Performance; Reliability; Weibull method; SITE-SPECIFIC DESIGN; ENERGY-SYSTEMS; TURBINES; PREDICTION;
D O I
10.1016/j.renene.2010.04.023
中图分类号
X [环境科学、安全科学];
学科分类号
08 ; 0830 ;
摘要
In this paper, an analysis of the performance, failure and reliability, as well as a spare parts analysis have been conducted for a wind farm, which has 15 wind turbine generators (WTGs), each of 225 kW capacity. This wind farm is located at Muppandal, Tamil Nadu, South India. The average value of performance parameters such as technical availability, real availability and capacity factor for the wind farm were 94%, 82.88% and 24.9% respectively during the years 2000-2004. This paper also deals with Pareto analysis to find out the reduction in problems, when one problem is tackled partly and completely. The Weibull technique was also used for the reliability analysis. The reliability factor in the initial period after one year seems to be good as the wind farm has a lower failure rate of 0.000019. As a supplemental activity, spare parts optimization was also carried out for a few vital components of this wind farm and the results are presented. The failure and its financial implications are also analyzed in this paper. (C) 2010 Elsevier Ltd. All rights reserved.
引用
收藏
页码:2739 / 2751
页数:13
相关论文
共 15 条
[11]   Technical assessment of the use of a small-scale wind power system to meet the demand for electricity in a land aquafarm in Taiwan [J].
Lai, CM ;
Lin, TH .
RENEWABLE ENERGY, 2006, 31 (06) :877-892
[12]   Simulation of wind energy output at Guajira, Colombia [J].
Mejía, JM ;
Chejne, F ;
Smith, R ;
Rodríguez, LF ;
Fernández, O ;
Dyner, I .
RENEWABLE ENERGY, 2006, 31 (03) :383-399
[13]   Improved blade designs and manufacturing processes reduce the cost of wind energy [J].
O'Dell, K .
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 2001, 123 (04) :268-268
[14]   Statistical investigation of wind energy reliability and its application [J].
Sen, Z .
RENEWABLE ENERGY, 1997, 10 (01) :71-79
[15]   Potentials for site-specific design of MW sized wind turbines [J].
Thomsen, K ;
Fuglsang, P ;
Schepers, G .
JOURNAL OF SOLAR ENERGY ENGINEERING-TRANSACTIONS OF THE ASME, 2001, 123 (04) :304-309