The role of solvent and morphology on miscibility of methanofullerene and poly(3-hexylthiophene)

被引:15
作者
Gadisa, Abay [1 ]
Tumbleston, John R. [2 ]
Ko, Doo-Hyun [1 ]
Aryal, Mukti [2 ]
Lopez, Rene [2 ]
Samulski, Edward T. [1 ]
机构
[1] Univ N Carolina, Dept Chem, Caudill & Kenan Labs, Chapel Hill, NC 27599 USA
[2] Univ N Carolina, Dept Phys & Astron, Chapel Hill, NC 27599 USA
基金
美国国家科学基金会;
关键词
P3HT/PCBM bilayer; Poly(3-hexylthiophene); Miscibility; Morphology; Photovoltaic; Interdiffusion; OPEN-CIRCUIT VOLTAGE; POLYMER PHOTOVOLTAIC CELLS; SOLAR-CELLS; PHOTOCURRENT GENERATION; CHARGE-TRANSPORT; PHASE-SEPARATION; PERFORMANCE; ORGANIZATION; FILMS;
D O I
10.1016/j.tsf.2012.03.117
中图分类号
T [工业技术];
学科分类号
08 ;
摘要
A bicontinuous, percolating bulk heterojunction morphology is integral to organic polymer solar cells. Understanding the factors affecting the miscibility of photovoltaic polymers with a fullerene electron acceptor molecule is a key to controlling the morphology. Starting from discreet pure phases - a poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl-C-61-butyric acid methyl ester (PCBM) bilayer film - the evolution of the P3HT-PCBM interface was studied with particular attention to the role of residual solvent in P3HT on PCBM interdiffusion. This investigation shows that in the bilayer geometry PCBM can rapidly diffuse into amorphous P3HT, but phase separation is maintained if the P3HT layer is cast from a very volatile solvent or if it is annealed prior to casting the PCBM overlayer to complete the bilayer geometry. Published by Elsevier B.V.
引用
收藏
页码:5466 / 5471
页数:6
相关论文
共 43 条
[31]   Imaging the Carrier Photogeneration in Nanoscale Phase Segregated Organic Heterojunctions by Kelvin Probe Force Microscopy [J].
Spadafora, Evan J. ;
Demadrille, Renaud ;
Ratier, Bernard ;
Grevin, Benjamin .
NANO LETTERS, 2010, 10 (09) :3337-3342
[32]   Organic photovoltaics -: Polymer-fullerene composite solar cells [J].
Thompson, Barry C. ;
Frechet, Jean M. J. .
ANGEWANDTE CHEMIE-INTERNATIONAL EDITION, 2008, 47 (01) :58-77
[33]   Interdiffusion of PCBM and P3HT Reveals Miscibility in a Photovoltaically Active Blend [J].
Treat, Neil D. ;
Brady, Michael A. ;
Smith, Gordon ;
Toney, Michael F. ;
Kramer, Edward J. ;
Hawker, Craig J. ;
Chabinyc, Michael L. .
ADVANCED ENERGY MATERIALS, 2011, 1 (01) :82-89
[34]   P3HT/PCBM Bulk Heterojunction Solar Cells: Impact of Blend Composition and 3D Morphology on Device Performance [J].
van Bavel, Svetlana S. ;
Baerenklau, Maik ;
de With, Gijsbertus ;
Hoppe, Harald ;
Loos, Joachim .
ADVANCED FUNCTIONAL MATERIALS, 2010, 20 (09) :1458-1463
[35]   Three-Dimensional Nanoscale Organization of Bulk Heterojunction Polymer Solar Cells [J].
van Bavel, Svetlana S. ;
Sourty, Erwan ;
de With, Gijsbertus ;
Loos, Joachim .
NANO LETTERS, 2009, 9 (02) :507-513
[36]   The relation between open-circuit voltage and the onset of photocurrent generation by charge-transfer absorption in polymer: Fullerene bulk heterojunction solar cells [J].
Vandewal, Koen ;
Gadisa, Abay ;
Oosterbaan, Wibren D. ;
Bertho, Sabine ;
Banishoeib, Fateme ;
Van Severen, Ineke ;
Lutsen, Laurence ;
Cleij, Thomas J. ;
Vanderzande, Dirk ;
Manca, Jean V. .
ADVANCED FUNCTIONAL MATERIALS, 2008, 18 (14) :2064-2070
[37]  
Vandewal K, 2009, NAT MATER, V8, P904, DOI [10.1038/NMAT2548, 10.1038/nmat2548]
[38]   Effects of Thermal Annealing Upon the Morphology of Polymer-Fullerene Blends [J].
Verploegen, Eric ;
Mondal, Rajib ;
Bettinger, Christopher J. ;
Sok, Seihout ;
Toney, Michael F. ;
Bao, Zhenan .
ADVANCED FUNCTIONAL MATERIALS, 2010, 20 (20) :3519-3529
[39]   A Quantitative Study of PCBM Diffusion during Annealing of P3HT: PCBM Blend Films [J].
Watts, Benjamin ;
Belcher, Warwick J. ;
Thomsen, Lars ;
Ade, Harald ;
Dastoor, Paul C. .
MACROMOLECULES, 2009, 42 (21) :8392-8397
[40]   Vertical Phase Separation in Poly(3-hexylthiophene): Fullerene Derivative Blends and its Advantage for Inverted Structure Solar Cells [J].
Xu, Zheng ;
Chen, Li-Min ;
Yang, Guanwen ;
Huang, Chun-Hao ;
Hou, Jianhui ;
Wu, Yue ;
Li, Gang ;
Hsu, Chain-Shu ;
Yang, Yang .
ADVANCED FUNCTIONAL MATERIALS, 2009, 19 (08) :1227-1234