Effect of fluorine on the electrochemical properties of layered Li(Ni0.5Mn0.5)O2 cathode materials

被引:30
作者
Kang, SH
Belharouak, I
Sun, YK
Amine, K [1 ]
机构
[1] Argonne Natl Lab, Electrochem Technol Program, Div Chem Engn, Argonne, IL 60439 USA
[2] Hanyang Univ, Dept Chem Engn, Seoul 133791, South Korea
关键词
Li-ion battery; Li(Ni0.5Mn0.5)O-2; layered material; fluorine substitution;
D O I
10.1016/j.jpowsour.2005.03.084
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Fluorine-doped Li(Ni0.5Mn0.5)O-2 or Li(Ni0.5+0.5zMn0.5-0.5z)O2-zFz (0 <= z <= 0.2) has been synthesized by a solid-state reaction method. X-ray diffraction patterns showed that the synthesized materials had layered alpha-NaFeO2-type structure (R (3) over barm); the Rietveld analysis revealed that lattice parameters (a and c of hexagonal setting) and degree of cation mixing increased with increasing fluorine content (z). Initial discharge capacity of the cathode materials increased with z, showed maximum at z=0.02, and decreased afterwards. At the same time, impedance of the cathode materials decreased with z, reached minimum at z=0.02, and then increased afterwards. Among the materials prepared and studied in this work, Li(Ni0.51Mn0.49)O1.98F0.02 exhibited the best electrochemical properties in terms of capacity (151 mAh g(-1)), impedance (67 Omega cm(2)) and cycleability (no capacity fading up to 40 cycles). (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:650 / 653
页数:4
相关论文
共 13 条
[1]   Enhancement of the electrochemical properties of Li1Mn2O4 through chemical substitution [J].
Amatucci, GG ;
Pereira, N ;
Zheng, T ;
Plitz, I ;
Tarascon, JM .
JOURNAL OF POWER SOURCES, 1999, 81 :39-43
[2]   Failure mechanism and improvement of the elevated temperature cycling of LiMn2O4 compounds through the use of the LiAlxMn2-xO4-zFz solid solution [J].
Amatucci, GG ;
Pereira, N ;
Zheng, T ;
Tarascon, JM .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2001, 148 (02) :A171-A182
[3]   Layered Li(Ni0.5-xMn0.5-xM′2x)O2 (M′ = Co, Al, Ti; x = 0, 0.025) cathode materials for Li-ion rechargeable batteries [J].
Kang, SH ;
Kim, J ;
Stoll, ME ;
Abraham, D ;
Sun, YK ;
Amine, K .
JOURNAL OF POWER SOURCES, 2002, 112 (01) :41-48
[4]  
KANG SH, 2003, 204 ECS M ORL FL OCT
[5]   Layered xLiMO2 • (1-x)Li2M′O3 electrodes for lithium batteries:: a study of 0.95LiMn0.5Ni0.5O2 • 0.05Li2TiO3 [J].
Kim, JS ;
Johnson, CS ;
Thackeray, MM .
ELECTROCHEMISTRY COMMUNICATIONS, 2002, 4 (03) :205-209
[6]   Synthesis and electrochemical properties for LiNiO2 substituted by other elements [J].
Kubo, K ;
Fujiwara, M ;
Yamada, S ;
Arai, S ;
Kanda, M .
JOURNAL OF POWER SOURCES, 1997, 68 (02) :553-557
[7]   Synthesis and charge-discharge properties of Li1+xNi1-x-yCoyO2-zFz [J].
Kubo, K ;
Arai, S ;
Yamada, S ;
Kanda, M .
JOURNAL OF POWER SOURCES, 1999, 81 :599-603
[8]   Lithium insertion material of LiNi1/2Mn1/2O2 for advanced lithium-ion batteries [J].
Makimura, Y ;
Ohzuku, T .
JOURNAL OF POWER SOURCES, 2003, 119 :156-160
[9]   Lithium nickel oxyfluoride (Li1-zNi1+zFyO2-y) and lithium magnesium nickel oxide (Li1-z(MgxNi1-x)1+z O2) cathodes for lithium rechargeable batteries Part I.: Synthesis and characterization of bulk phases [J].
Naghash, AR ;
Lee, JY .
ELECTROCHIMICA ACTA, 2001, 46 (07) :941-951
[10]   Lithium nickel oxyfluoride (Li1-zNi1+zFyO2-y) and lithium magnesium nickel oxide (Li1-z(MgxN1-x)1+zO2) cathodes for lithium rechargeable batteries II.: Electrochemical investigations [J].
Naghash, AR ;
Lee, JY .
ELECTROCHIMICA ACTA, 2001, 46 (15) :2293-2304