Corrosion resistance of CrAlN and TiAlN coatings deposited by lateral rotating cathode arc

被引：140

作者：

Ding, Xing-zhao ^{[1
]}

Tan, A. L. K. ^{[1
]}

Zeng, X. T. ^{[1
]}

Wang, C. ^{[2
]}

Yue, T. ^{[2
]}

Sun, C. Q. ^{[2
]}

机构：

[1] Singapore Inst Mfg Technol, Singapore 638075, Singapore

[2] Nanyang Technol Univ, Sch Elect & Elect Engn, Singapore 639798, Singapore

来源：

THIN SOLID FILMS | 2008年 / 516卷 / 16期

关键词：

corrosion; chromium aluminum nitride coating; titanium aluminum nitride coating; lateral rotating cathode arc;

D O I：

10.1016/j.tsf.2007.07.069

中图分类号：

T [工业技术];

学科分类号：

08 [工学];

摘要：

In this work, CrAlN and TiAlN coatings were deposited on stainless steel substrates by a vacuum arc reactive deposition process from two lateral rotating elemental aluminum and chromium or titanium cathodes in a flowing pure nitrogen atmosphere. The composition and crystalline structure of the as-deposited coatings was analyzed by energy dispersive analysis of X-rays (EDX) and X-ray diffraction (XRD), respectively. The corrosion resistance of the CrAIN-coated and TiAIN-coated samples in a 3 wt.% NaCl solution was evaluated and compared by electrochemical potentiodynamic polarization method. It was found that both the CrAIN and RAIN coatings exhibited their best corrosion resistance, respectively, at a composition with Cr/Al or Ti/Al atomic ratio of around 1:1, while the CrAlN coatings showed an evidently better corrosion resistance than the TiAlN coatings. (C) 2007 Elsevier B.V. All rights reserved.

引用

页码：5716 / 5720

页数：5

共 26 条

[1]

On the corrosion behavior of multilayered WC-Ti1-xAlxN coatings on AISI D2 steel [J].

Ahn, SH ;

Yoo, JH ;

Kim, JG ;

Han, JG .

SURFACE & COATINGS TECHNOLOGY, 2003, 163 :611-619

[2]

High-temperature oxidation resistance of Cr1-xAlxN thin films deposited by reactive magnetron sputtering [J].

Banakh, O ;

Schmid, PE ;

Sanjinés, R ;

Lévy, E .

SURFACE & COATINGS TECHNOLOGY, 2003, 163 :57-61

[3]

Porosity evaluation of protective coatings onto steel, through electrochemical techniques [J].

Creus, J ;

Mazille, H ;

Idrissi, H .

SURFACE & COATINGS TECHNOLOGY, 2000, 130 (2-3) :224-232

[4]

Structural, mechanical and tribological properties of CrAlN coatings deposited by reactive unbalanced magnetron sputtering [J].

Ding, XZ ;

Zeng, XT .

SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6) :1372-1376

[5]

Corrosion behaviour of decorative and wear resistant coatings on steel deposited by reactive magnetron sputtering - Tests and improvements [J].

Fenker, M. ;

Balzer, M. ;

Kappl, H. .

THIN SOLID FILMS, 2006, 515 (01) :27-32

[6]

Corrosion behaviors of Cr(N,O)/CrN double-layered coatings by cathodic arc deposition [J].

Ho, WY ;

Hsu, CH ;

Huang, DH ;

Lin, YC ;

Chang, CL ;

Wang, DY .

SURFACE & COATINGS TECHNOLOGY, 2005, 200 (5-6) :1303-1309

[7]

CrAlYN/CrN superlattice coatings deposited by the combined high power impulse magnetron sputtering/unbalanced magnetron sputtering technique [J].

Hovsepian, P. Eh. ;

Reinhard, C. ;

Ehiasarian, A. P. .

SURFACE & COATINGS TECHNOLOGY, 2006, 201 (07) :4105-4110

[8]

Corrosion of stainless steel coated with TiN, (TiAl)N and CrN in aqueous environments [J].

Ibrahim, MAM ;

Korablov, SF ;

Yoshimura, M .

CORROSION SCIENCE, 2002, 44 (04) :815-828

[9]

CORROSION STUDIES WITH HARD COATING SUBSTRATE SYSTEMS [J].

JEHN, HA ;

BAUMGARTNER, ME .

SURFACE & COATINGS TECHNOLOGY, 1992, 54 (1-3) :108-114

[10]

Development of novel coating technology by vacuum arc with rotating cathodes for industrial production of nc-(Al1-xTix)N/a-Si3N4 superhard nanocomposite coatings for dry, hard machining [J].

Jilek, M ;

Cselle, T ;

Holubar, P ;

Morstein, M ;

Veprek-Heijman, MGJ ;

Veprek, S .

PLASMA CHEMISTRY AND PLASMA PROCESSING, 2004, 24 (04) :493-510

← 1 2 3 →