Dietary exposure assessment of infants to bisphenol A from the use of polycarbonate baby milk bottles

The residual bisphenol A (BPA) levels in 28 different brands of polycarbonate (PC) baby milk bottles available in the Singapore market were measured. With a detection limit of 3 mg/kg, BPA residues were detected in 19 out of the 28 PC baby milk bottles at levels between 4.01 and 141 mg/kg, with a mean of 28.1 +/- 31.4 mg/kg and a median of 17.2 mg/kg. The potential migration of BPA from each of the 28 PC milk bottles was also measured using food-simulating solvents and time conditions recommended by the US Food and Drug Administration ( US FDA), but using temperatures more severe than actual use. The highest upper-bound mean BPA migration levels of 0.64 +/- 0.48 mu g/in(2) in 10% ethanol at 70 degrees C and 0.43 +/- 1.25 mu g/in(2) in corn oil at 100 degrees C were observed after incubating cut portions of the milk bottles for 240 h. With this migration data and using US FDA's procedure for estimation of dietary exposure, the worst-case dietary exposure assessment for the intake of BPA by infants between birth and three months of age was below the oral Reference Dose of 0.05 mg/kg bw/day established by the US Environmental Protection Agency. This study showed that the dietary exposure to BPA from actual uses of PC milk bottles is unlikely to pose a health risk in infants.