Atmospheric pressure DBD gun and its application in ink printability

被引:15
作者
Chen, Q [1 ]
Zhang, YF [1 ]
Han, E [1 ]
Ge, YJ [1 ]
机构
[1] Beijing Inst Graph Commun, Lab Plasma Phys & Mat, Beijing 102600, Peoples R China
关键词
D O I
10.1088/0963-0252/14/4/005
中图分类号
O35 [流体力学]; O53 [等离子体物理学];
学科分类号
070204 ; 080103 ; 080704 ;
摘要
In this paper, a plasma source discharging at atmospheric pressure and its characterization diagnosed by a Langmuir probe and a digital camera are presented. As an application the dielectric barrier discharge (DBD) gun modifying an ultraviolet cured resin surface for ink printability is reported. The results from the digital camera indicate the uniformity and homogeneity of the plasma generated from the gun in the downstream but depending on the input power, diameter of electrodes, gas flow rates and the distance between the substrates and the nozzle. The contact angle measurement proves the efficiency of gun during the surface modification. The ink printability following DBD gun processing described here was significantly improved. The performed surface analysis using Fourier transform infrared indicates that the polarity of surface grafted in plasma is responsible for the film printability.
引用
收藏
页码:670 / 675
页数:6
相关论文
共 25 条
[21]  
RATNER BD, 1992, J BIOMAT SCI-POLYM E, V4, P3
[22]   Hydrophilic modification of polymeric membranes by low temperature H2O plasma treatment [J].
Steen, ML ;
Jordan, AC ;
Fisher, ER .
JOURNAL OF MEMBRANE SCIENCE, 2002, 204 (1-2) :341-357
[23]   Superficial treatment of mammalian cells using plasma needle [J].
Stoffels, E ;
Kieft, IE ;
Sladek, REJ .
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 2003, 36 (23) :2908-2913
[24]   Plasma needle: a non-destructive atmospheric plasma source for fine surface treatment of (bio)materials [J].
Stoffels, E ;
Flikweert, AJ ;
Stoffels, WW ;
Kroesen, GMW .
PLASMA SOURCES SCIENCE & TECHNOLOGY, 2002, 11 (04) :383-388
[25]  
Yasuda H., 1985, PLASMA POLYM