Atomic force microscopy investigation of filled elastomers and comparison with transmission electron microscopy -: application to silica-filled silicone elastomers

被引:51
作者
Clément, F
Lapra, A
Bokobza, L
Monnerie, L
Ménez, P
机构
[1] ESPCI, UMR 7615, Lab PCSM, F-75231 Paris 05, France
[2] RHODIA Rech, Ctr Rech Lyon, F-69192 St Fons, France
关键词
atomic force microscopy; filled elastomers; filler dispersion;
D O I
10.1016/S0032-3861(01)00058-1
中图分类号
O63 [高分子化学(高聚物)];
学科分类号
070305 ; 080501 ; 081704 ;
摘要
Tapping mode atomic force microscopy experiments were conducted on silica-filled silicone elastomers. phase images provide a good contrast between the silicone matrix and silica structures, and allow the study of silica microdispersions. However, the phase contrast is sensitive to several experimental factors, which affect the magnitude of rip-sample interactions. The dependence of the phase contrast on the free amplitude of cantilever oscillation, on the setpoint ratio, on the cantilever stiffness and on the sample modulus was investigated. The setpoint ratio was shown to be the main parameter controlling the tip-sample force, and consequently the phase contrast. By comparing the results with transmission electron microscopy experiments, the tapping mode atomic force microscopy with phase imaging is established as an easy and powerful technique for the characterization of the silica dispersion in a silicone matrix. This study opens the way for using Atomic force microscopy to get a better understanding of reinforcement in filled rubbers. (C) 2001 Elsevier Science Ltd. All rights reserved.
引用
收藏
页码:6259 / 6270
页数:12
相关论文
共 18 条
[1]  
AMBACHER H, 1991, KAUTSCHUK GUMMI KUNS, V44, P111
[2]   Examination of butadiene/styrene-co-butadiene rubber blends by tapping mode atomic force microscopy.: Importance of the indentation depth and reduced tip-sample energy dissipation in tapping mode atomic force microscopy study of elastomers [J].
Bar, G ;
Ganter, M ;
Brandsch, R ;
Delineau, L ;
Whangbo, MH .
LANGMUIR, 2000, 16 (13) :5702-5711
[3]   Effect of viscoelastic properties of polymers on the phase shift in tapping mode atomic force microscopy [J].
Bar, G ;
Brandsch, R ;
Whangbo, MH .
LANGMUIR, 1998, 14 (26) :7343-7348
[4]   Factors affecting the height and phase images in tapping mode atomic force microscopy. Study of phase-separated polymer blends of poly(ethene-co-styrene) and poly(2,6-dimethyl-1,4-phenylene oxide) [J].
Bar, G ;
Thomann, Y ;
Brandsch, R ;
Cantow, HJ ;
Whangbo, MH .
LANGMUIR, 1997, 13 (14) :3807-3812
[5]   Examination of the relationship between phase shift and energy dissipation in tapping mode atomic force microscopy by frequency-sweep and force-probe measurements [J].
Bar, G ;
Brandsch, R ;
Bruch, M ;
Delineau, L ;
Whangbo, MH .
SURFACE SCIENCE, 2000, 444 (1-3) :L11-L16
[6]  
Binggeli M., 1993, Nanotechnology, V4, P59, DOI 10.1088/0957-4484/4/2/001
[7]   On the factors affecting the contrast of height and phase images in tapping mode atomic force microscopy [J].
Brandsch, R ;
Bar, G ;
Whangbo, MH .
LANGMUIR, 1997, 13 (24) :6349-6353
[8]   How does a tip tap? [J].
Burnham, NA ;
Behrend, OP ;
Oulevey, F ;
Gremaud, G ;
Gallo, PJ ;
Gourdon, D ;
Dupas, E ;
Kulik, AJ ;
Pollock, HM ;
Briggs, GAD .
NANOTECHNOLOGY, 1997, 8 (02) :67-75
[9]   NUMERICAL SIMULATIONS OF A SCANNING FORCE MICROSCOPE WITH A LARGE-AMPLITUDE VIBRATING CANTILEVER [J].
CHEN, J ;
WORKMAN, RK ;
SARID, D ;
HOPER, R .
NANOTECHNOLOGY, 1994, 5 (04) :199-204
[10]  
CHERNOFF DA, 1995, P MICR MICR