Electrochemical properties of nano-sized Li4Ti5O12 powders synthesized by a sol-gel process and characterized by X-ray absorption spectroscopy

被引:114
作者
Venkateswarlu, M
Chen, CH
Do, JS
Lin, CW
Chou, TC
Hwang, BJ [1 ]
机构
[1] Natl Taiwan Univ Sci & Technol, Dept Chem Engn, Taipei 106, Taiwan
[2] Tunghai Univ, Dept Chem Engn, Taichung 704, Taiwan
[3] Natl Yunlin Univ Sci & Technol, Dept Chem Engn, Yunlin 640, Taiwan
[4] Natl Cheng Kung Univ, Dept Chem Engn, Tainan 700, Taiwan
关键词
nano-sized; Li4Ti5O12; XRD; XAS; cycle performance;
D O I
10.1016/j.jpowsour.2005.03.016
中图分类号
O64 [物理化学(理论化学)、化学物理学];
学科分类号
070304 ; 081704 ;
摘要
Nano-sized spinel Li4Ti5O12 powders were synthesized by a sol-gel process. The cubic spinel structure without impurity phase of the synthesized Li4Ti5O12 powders was confirmed by X-ray diffraction. The average grain size of the synthesized powders was found to be around 39 run. In situ X-ray absorption spectroscopy (XAS) has been performed on the Li4Ti5O12 electrode to investigate its change in the oxidation state and the local environment of the electrode during charging and discharging processes. The X-ray absorption near edge spectroscopy (XANES) analysis showed that the absorption edge energy shifts towards lower and higher energy, respectively, during discharge and charge processes, indicating the reversibility of the electrode is quite good. It was worthy to note that the discharging capacity and the charging capacity obtained for the nano-sized Li4Ti5O12 electrode in the potential range of 0.01-1.75 V are 255 and 242 mAh g(-1), respectively. However, the specific charge capacity obtained in the potential range of 1.0-2.0 V is 126 mAh g(-1). The spinel Li4Ti5O12 electrode maintains the cubic spinel structure for repeated cycling resulting in good cyclability and the capacity retention. (c) 2005 Elsevier B.V. All rights reserved.
引用
收藏
页码:204 / 208
页数:5
相关论文
共 20 条
[1]   Plastic crystal-lithium batteries: An effective ambient temperature all-solid-state power source [J].
Abouimrane, A ;
Abu-Lebdeb, Y ;
Alarco, PJ ;
Armand, M .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 2004, 151 (07) :A1028-A1031
[2]   Electrochemical behavior of a lithium titanium spinel compound synthesized via a sol-gel process [J].
Bach, S ;
Pereira-Ramos, JP ;
Baffier, N .
JOURNAL OF MATERIALS CHEMISTRY, 1998, 8 (01) :251-253
[3]  
Cullity B.D., 1956, ELEMENTS XRAY DIFFRA
[4]   SPINEL ANODES FOR LITHIUM-ION BATTERIES [J].
FERG, E ;
GUMMOW, RJ ;
DEKOCK, A ;
THACKERAY, MM .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1994, 141 (11) :L147-L150
[5]   Influence of Mn content on the morphology and electrochemical performance of LiNi1-x-yCoxMnyO2 cathode materials [J].
Hwang, BJ ;
Tsai, YW ;
Chen, CH ;
Santhanam, R .
JOURNAL OF MATERIALS CHEMISTRY, 2003, 13 (08) :1962-1968
[6]   Effect of various synthetic parameters on purity of LiMn2O4 spinel synthesized by a sol-gel method at low temperature [J].
Hwang, BJ ;
Santhanam, R ;
Liu, DG .
JOURNAL OF POWER SOURCES, 2001, 101 (01) :86-89
[7]   Facile synthesis of nanocrystalline Li4Ti5O12 (spinel) exhibiting fast Li insertion [J].
Kavan, L ;
Grätzel, M .
ELECTROCHEMICAL AND SOLID STATE LETTERS, 2002, 5 (02) :A39-A42
[8]   Preparation of particulate Li4Ti5O12 having excellent characteristics as an electrode active material for power storage cells [J].
Nakahara, K ;
Nakajima, R ;
Matsushima, T ;
Majima, H .
JOURNAL OF POWER SOURCES, 2003, 117 (1-2) :131-136
[9]   ZERO-STRAIN INSERTION MATERIAL OF LI[LI1/3TI5/3]O-4 FOR RECHARGEABLE LITHIUM CELLS [J].
OHZUKU, T ;
UEDA, A ;
YAMAMOTO, N .
JOURNAL OF THE ELECTROCHEMICAL SOCIETY, 1995, 142 (05) :1431-1435
[10]   A new type of lithium-ion cell based on the Li4Ti5O12/Li2Co0.4Fe0.4Mn3.2O8 high-voltage, electrode combination [J].
Panero, S ;
Satolli, D ;
Salomon, M ;
Scrosati, B .
ELECTROCHEMISTRY COMMUNICATIONS, 2000, 2 (11) :810-813