Carbon nanotubes (CNTs) were added to Ultra-high molecular weight polyethylene (UHMWPE) to improve the tribological properties of UHMWPE. CNTs which have a diameter of about 10-50 nm, while their length is about 3-5 nm were produced by the catalytic decomposition of acetylene gas using a tube furnace. Ball-on-disc-type wear tests were performed to evaluate the tribological performance of UHMWPE composites reinforced with CNTs. The results showed that addition of carbon nanotube up to 0.5 wt% lowered wear loss significantly and increased friction coefficient slightly. Also through the scanning electron microscope (SEM), the surfaces of UHMWPE were observed and analyzed to discuss the tribological behavior of CNT added UHMWPE.