Natural and man-made cellulose fibre-reinforced poly(lactic acid) (PLA) composites: An overview about mechanical characteristics and application areas

被引：428

作者：

Graupner, Nina ^{[1
,2
]}

Herrmann, Axel S. ^{[2
]}

Muessig, Joerg ^{[1
]}

机构：

[1] Univ Appl Sci Bremen, Fac Biomimet Biol Mat 5, D-28199 Bremen, Germany

[2] Faserinst Bremen eV, FIBRE, D-28359 Bremen, Germany

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 2009年 / 40卷 / 6-7期

关键词：

Fibres; Thermoplastic resin; Mechanical properties; Moulding compounds; Poly(lactic acid) (PLA); SUGAR-BEET PULP; GREEN COMPOSITES; POLYLACTIC ACID; RECYCLED NEWSPAPER; TENSILE PROPERTIES; KENAF FIBERS; BIOCOMPOSITES; POLY(L-LACTIDE); IMPROVEMENT; MORPHOLOGY;

D O I：

10.1016/j.compositesa.2009.04.003

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

The paper describes the production and the mechanical characteristics of composites made completely of renewable raw materials. Composites of different kinds of natural fibres like cotton, hemp, kenaf and man-made cellulose fibres (Lyocell) with various characteristics were processed with a fibre mass proportion of 40% and poly(lactic acid) (PLA) by compression moulding. Additionally, composites were made of fibre mixtures (hemp/kenaf, hemp/Lyocell). The composites were tested for tensile strength, elongation at break, Young's modulus and Charpy impact strength. Their characteristics varied markedly depending on the characteristics of the raw fibres and fibre bundles and fibre mixtures used. While kenaf and hemp/PLA composites showed very high tensile strength and Young's modulus values, cotton/PLA showed good impact characteristics. Lyocell/PLA composites combined both, high tensile strength and Young's modulus with high impact strength. Thus, the composites could be applied in various fields, each meeting different requirements. (C) 2009 Elsevier Ltd. All rights reserved.

引用

页码：810 / 821

页数：12

共 76 条

[21] A literature review of poly(lactic acid) [J].

Garlotta, D .

JOURNAL OF POLYMERS AND THE ENVIRONMENT, 2001, 9 (02) :63-84

[22]

GRASHORN C, 2007, 5 FIBREBASE K HURTH

[23] Application of lignin as natural adhesion promoter in cotton fibre-reinforced poly(lactic acid) (PLA) composites [J].

Graupner, Nina .

JOURNAL OF MATERIALS SCIENCE, 2008, 43 (15) :5222-5229

[24]

Gupta U, 2007, CINEASTE, V32, P82

[25] Fabrication and mechanical properties of completely biodegradable hemp fiber reinforced polylactic acid composites [J].

Hu, Ruihua ;

Lim, Jae-Kyoo .

JOURNAL OF COMPOSITE MATERIALS, 2007, 41 (13) :1655-1669

[26] Wood-fiber-reinforced poly(lactic acid) composites: Evaluation of the physicomechanical and morphological properties [J].

Huda, M. S. ;

Drzal, L. T. ;

Misra, M. ;

Mohanty, A. K. .

JOURNAL OF APPLIED POLYMER SCIENCE, 2006, 102 (05) :4856-4869

[27] Effect of fiber surface-treatments on the properties of laminated biocomposites from poly(lactic acid) (PLA) and kenaf fibers [J].

Huda, Masud S. ;

Drzal, Lawrence T. ;

Mohanty, Amar K. ;

Misra, Manjusri .

COMPOSITES SCIENCE AND TECHNOLOGY, 2008, 68 (02) :424-432

[28] Chopped glass and recycled newspaper as reinforcement fibers in injection molded poly(lactic acid) (PLA) composites: A comparative study [J].

Huda, Masud S. ;

Drzal, Lawrence T. ;

Mohanty, Arnar K. ;

Misra, Manjusri .

COMPOSITES SCIENCE AND TECHNOLOGY, 2006, 66 (11-12) :1813-1824

[29] Green composites from recycled cellulose and poly(lactic acid): Physico-mechanical and morphological properties evaluation [J].

Huda, MS ;

Mohanty, AK ;

Drzal, LT ;

Schut, E ;

Misra, M .

JOURNAL OF MATERIALS SCIENCE, 2005, 40 (16) :4221-4229

[30] A study on biocomposites from recycled newspaper fiber and poly(lactic acid) [J].

Huda, MS ;

Drzal, LT ;

Misra, M ;

Mohanty, AK ;

Williams, K ;

Mielewski, DF .

INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH, 2005, 44 (15) :5593-5601

← 1 2 3 4 5 6 7 8 →