The mechanical response of three EB-PVD thermal barrier coating microstructures

被引:10
作者
Walter, ME
Eigenmann, B
机构
[1] Ohio State Univ, Dept Mech Engn, Columbus, OH 43210 USA
[2] DIEHL Stiftung & Co, Rothenbach, Germany
来源
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING | 2000年 / 282卷 / 1-2期
关键词
thermal barrier coatings; EB-PVD; texture; acoustic emission;
D O I
10.1016/S0921-5093(99)00773-X
中图分类号
TB3 [工程材料学];
学科分类号
0805 ; 080502 ;
摘要
The mechanical response of as-received thermal barrier coating specimens with three different microstructures was evaluated. Specimens consisted of rectangular bars of Inconel 617 substrates with NiCoCrAlY bond coats and EB-PVD zirconia top coats. The deposition conditions had been varied to produce columnar top coat microstructures with three different column sizes. Scanning electron microscopy, optical microscopy, and X-ray diffraction analyses were used to characterize the microstructures. Four-point bend experiments were performed with the top coat under either tension or compression. In situ microscopy identified the damage formation and propagation modes, and acoustic emission analyses also identified differences in the responses of each microstructure. (C) 2000 Elsevier Science S.A. All rights reserved.
引用
收藏
页码:49 / 58
页数:10
相关论文
共 19 条
[1]   FAILURE MECHANISMS OF A ZIRCONIA-8 WT-PERCENT YTTRIA THERMAL BARRIER COATING [J].
BARTLETT, AH ;
DALMASCHIO, R .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1995, 78 (04) :1018-1024
[2]  
Chaudhury ZA, 1998, J MATER SCI LETT, V17, P85, DOI 10.1023/A:1006562212251
[3]   Interfacial damage in EB-PVD thermal barrier coatings due to thermal cycling [J].
Chaudhury, ZA ;
Newaz, GM ;
Nusier, SQ ;
Ahmed, T .
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, 1997, 231 (1-2) :34-41
[4]   COLUMNAR MICROSTRUCTURE IN VAPOR-DEPOSITED THIN-FILMS [J].
DIRKS, AG ;
LEAMY, HJ .
THIN SOLID FILMS, 1977, 47 (03) :219-233
[5]  
FRITSCHER K, 1993, CERAMIC COATINGS, V44, P1
[6]   YTTRIA-STABILIZED HAFNIA-ZIRCONIA THERMAL BARRIER COATINGS - THE INFLUENCE OF HAFNIA ADDITION ON TBC STRUCTURE AND HIGH-TEMPERATURE BEHAVIOR [J].
IBEGAZENE, H ;
ALPERINE, S ;
DIOT, C .
JOURNAL OF MATERIALS SCIENCE, 1995, 30 (04) :938-951
[7]  
LAMMERMANN H, 1991, ADV MATER PROCESS, V140, P18
[8]   Concept of functionally graded materials for advanced thermal barrier coating applications [J].
Lee, WY ;
Stinton, DP ;
Berndt, CC ;
Erdogan, F ;
Lee, YD ;
Mutasim, Z .
JOURNAL OF THE AMERICAN CERAMIC SOCIETY, 1996, 79 (12) :3003-3012
[9]   Transformation and oxidation of a sputtered low-expansion Ni-Cr-Al-Ti-Si bond coating for thermal barrier systems [J].
Leyens, C ;
Fritscher, K ;
Peters, M ;
Kaysser, WA .
SURFACE & COATINGS TECHNOLOGY, 1997, 94-5 (1-3) :155-160
[10]   THE EVOLUTION OF THERMAL BARRIER COATINGS IN GAS-TURBINE ENGINE APPLICATIONS [J].
MEIER, SM ;
GUPTA, DK .
JOURNAL OF ENGINEERING FOR GAS TURBINES AND POWER-TRANSACTIONS OF THE ASME, 1994, 116 (01) :250-257