Tensile deformation and fracture behaviour of a titanium-alloy metal-matrix composite

被引：47

作者：

Srivatsan, TS

Soboyejo, WO

Lederich, RJ

机构：

[1] OHIO STATE UNIV,DEPT MAT SCI & ENGN,COLUMBUS,OH 43210

[2] MCDONNELL DOUGLAS CORP,ST LOUIS,MO 63166

来源：

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING | 1997年 / 28卷 / 04期

关键词：

metal-matrix composites; discontinuous reinforcement; microstructure; strengthening mechanisms;

D O I：

10.1016/S1359-835X(96)00136-4

中图分类号：

T [工业技术];

学科分类号：

08 ;

摘要：

In this paper, the microstructure, tensile behaviour and quasi-static fracture characteristics of a Ti-6Al-4V alloy reinforced with discontinuous whiskers of titanium boride, are presented and discussed. Microstructural analysis of the composite revealed a non-uniform dispersion of the whisker reinforcements in the Ti-6Al-4V matrix. The elastic modulus of the composite was better than that of the unreinforced matrix. The ambient-temperature yield strength of the Ti-6Al-4V/TiB composite was higher than the yield strength of the unreinforced matrix. The strength decreased with increase in test temperature. The increased strength of the composite is rationalized in terms of concurrent and mutually interactive influences of mechanisms based on work hardening and the substructure that evolves from the presence of additional dislocations. The intrinsic mechanisms and micromechanisms governing the tensile fracture process are discussed. (C) 1997 Elsevier Science Limited.

引用

页码：365 / 376

页数：12

共 49 条

[11] WORK-HARDENING OF COPPER-SILICA .1. MODEL BASED ON INTERNAL STRESSES, WITH NO PLASTIC RELAXATION [J].

BROWN, LM ;

STOBBS, WM .

PHILOSOPHICAL MAGAZINE, 1971, 23 (185) :1185-&

[12]

COURTNEY TH, 1991, METAL MATRIX COMPOSI, P101

[13] THE ELASTICITY AND STRENGTH OF PAPER AND OTHER FIBROUS MATERIALS [J].

COX, HL .

BRITISH JOURNAL OF APPLIED PHYSICS, 1952, 3 (MAR) :72-79

[14]

Dermarkar S., 1986, METAL MAT I METHODS, V2, P144

[15] SILICON-CARBIDE REINFORCED ALUMINUM - A FORMABLE COMPOSITE [J].

DIVECHA, AP ;

FISHMAN, SG ;

KARMARKAR, SD .

JOURNAL OF METALS, 1981, 33 (09) :12-17

[16]

DIVECHA AP, 1977, FAILURE MODES COMPOS, V4, P406

[17]

DOYCHAK J, 1992, JOM-J MIN MET MAT S, V44, P46

[18] YIELDING IN UNIDIRECTIONAL COMPOSITES UNDER EXTERNAL LOADS AND TEMPERATURE-CHANGES [J].

DVORAK, GJ ;

RAO, MSM ;

TARN, JQ .

JOURNAL OF COMPOSITE MATERIALS, 1973, 7 (APR) :194-216

[19]

DVORAK GJ, 1991, METAL MATRIX COMPOSI

[20] ON THE STRENGTH OF HEAVILY COLD-WORKED INSITU COMPOSITES [J].

FUNKENBUSCH, PD ;

COURTNEY, TH .

ACTA METALLURGICA, 1985, 33 (05) :913-922

← 1 2 3 4 5 →