Simple method enabling pulse on command from high power, high frequency lasers

被引:2
作者
Baer, David J. [1 ]
Marshall, Graham D. [1 ]
Coutts, David W. [1 ]
Mildren, Richard P. [1 ]
Withford, Michael J. [1 ]
机构
[1] Macquarie Univ, Dept Phys, Ctr Lasers & Appl, N Ryde, NSW 2109, Australia
基金
澳大利亚研究理事会;
关键词
D O I
10.1063/1.2338284
中图分类号
TH7 [仪器、仪表];
学科分类号
0804 ; 080401 ; 081102 ;
摘要
A method for addressing individual laser pulses in high repetition frequency systems using an intracavity optical chopper and novel electronic timing system is reported. This "pulse on command" capability is shown to enable free running and both subharmonic pulse rate and burst mode operation of a high power, high pulse frequency copper vapor laser while maintaining a fixed output pulse energy. We demonstrate that this technique can be used to improve feature finish when laser micromachining metal. (c) 2006 American Institute of Physics.
引用
收藏
页数:5
相关论文
共 10 条
[1]   High-average-power (15-W) 255-nm source based on second-harmonic generation of a copper laser master oscillator power amplifier system in cesium lithium borate [J].
Brown, DJW ;
Withford, MJ .
OPTICS LETTERS, 2001, 26 (23) :1885-1887
[2]   The effect of pulse repetition rate on laser ablation of polyimide and polymethylmethacrylate-based polymers [J].
Burns, FC ;
Cain, SR .
JOURNAL OF PHYSICS D-APPLIED PHYSICS, 1996, 29 (05) :1349-1355
[3]   Modeling the plasma kinetics in a kinetically enhanced copper vapor laser utilizing HCl+H2 admixtures [J].
Carman, RJ ;
Mildren, RP ;
Withford, MJ ;
Brown, DJW ;
Piper, JA .
IEEE JOURNAL OF QUANTUM ELECTRONICS, 2000, 36 (04) :438-449
[4]   Particle image velocimetry: A review [J].
Grant, I .
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART C-JOURNAL OF MECHANICAL ENGINEERING SCIENCE, 1997, 211 (01) :55-76
[5]   Enhanced polymer ablation rates using high-repetition-rate ultraviolet lasers [J].
Illy, EK ;
Brown, DJW ;
Withford, MJ ;
Piper, JA .
IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS, 1999, 5 (06) :1543-1548
[6]  
JINGYA H, 1983, J APPL PHYS, V54, P2214
[7]  
Korner C, 1996, APPL PHYS A-MATER, V63, P123, DOI 10.1007/BF01567639
[8]   A SELF-CONSISTENT MODEL FOR HIGH REPETITION RATE COPPER VAPOR LASERS [J].
KUSHNER, MJ .
IEEE JOURNAL OF QUANTUM ELECTRONICS, 1981, 17 (08) :1555-1565
[9]   Afterglow ground-state copper density behavior in kinetically enhanced copper vapor lasers [J].
Mildren, RP ;
Withford, MJ ;
Brown, DJW ;
Carman, RJ ;
Piper, JA .
IEEE JOURNAL OF QUANTUM ELECTRONICS, 1998, 34 (12) :2275-2278
[10]   Laser cutting of high-vitrified ceramic materials:: development of a method using a Nd:YAG laser to avoid catastrophic breakdown [J].
Pascual-Cosp, J ;
del Valle, AJR ;
García-Fortea, J ;
Sánchez-Soto, PJ .
MATERIALS LETTERS, 2002, 55 (04) :274-280